We really like design # 19. Can we see what it looks like without the triangle part at the bottom. More specifically with the torso ending where the triangular (sacrum) bone starts and the bottom of the capitol flush with the torso bottom?
we like entries #19 and #21 as far as placement of the head within the capitol tower but want to see the torso bottom like in entry #23 and #24. The top of the spine should end where you have it in entry #23 and #24 not lower down like in #25-30. If we could get a combination of #19 or #21 with the bottom of #23 or #24 that would almost be perfect. Also, is there any way to smooth out the curves on the sides or make the curves lower down to simulate hips more accurately. Thank you for the hard work.
I think #60 is the best so far and really close to the final logo. Can you make the trim underneath the torso thinner like in #19 with the black border on the side base the same height as in #19. Basically the side black strip is thicker than the black strip below the torso. Also, the body appears slightly more to the right than the left within the capitol where you see more black around the left shoulder and almost no black around the right shoulder. Is there any way to center it more? Lastly, the elbows/arms look slightly awkward. Is there a way to smooth out the arms where there isnt such a big exaggeration between the upper arm and lower arm. Thank you so much. Ive showed this logo to multiple people and they all like it very much. I'm glad you live in NW austin. Our office will be off of Anderson Mill road and 183 so you may even see this logo sometime in the future.
OK...I hope this one is perfect. I really appreciate your attention to detail and want to get this absolutely right for you. I actually live in Kingsland NW of Austin but come to Austin a lot... some day I may stop by for a business card!