WFB Legal Consulting, Inc.Logo Design Contest

Like shape of this shield in entry 39

Halo !
Thank You , here is a variation without 3d effect #41 .

if there is any other change you would like to see , feel free to let me know .


Regards,
Serjunan

Try starburst effect from #24 inside shield on #41. Use same color scheme. Then try starburst using color scheme of #39 as well. Take out verbiage inside shield on both versions.

Thank You for the 1st rank and your feedback .
I may not be able to add the starburst effect similar to #24 .

and I'm not sure what i'm thinking about "Take out verbiage inside shield on both versions" , i just remove the "proudly protecting others" . #45 #46

and here is an other variation #47 #48

Thank You ,
Regards,
Serjunan

Serjunan, there are 2 renditions I'd like to see:
1) remove the "WFB" and white horizontal dividing lines in #45 and just add the starburst. Maintain the blue shield. Add "LEGAL CONSULTING, INC" + tagline underneath the "WFB" headline as in #48
2) insert "WFB" prominently inside the blue shield #45 without the starburst. Again, without the white horizontal dividers and remove the redundant WFB in the title heading.
3) remove the "WFB" and blue horizontal dividing lines in #46 and just add the starburst. Maintain the gold shield. Add "LEGAL CONSULTING, INC" + tagline underneath the "WFB" headline as in #48
4) insert "WFB"prominently inside the gold shield #46 (raised lettering like the edge of the shield) and remove the starburst. Again, remove the blue horizontal dividers and remove the redundant WFB in the title heading.

Thanks.

Thank You for your feedback .
please check my entry #49 #50 #51 #52 #53

Regards ,
Serjunan

Try putting lines on each side of proudly protecting others in #52 and make shield a bit bigger in 3D. Also, try same with lines only on #53.

Sure , here is my entry #59 #60 #61 and #62 (adding shadow , thicker font inside the shield)



Regards,
Serjunan

Please see if you can "raise" WFB inside the shield a little more on #62. Please also provide a new separate rendition of #62 AND #45 putting a larger "WFB" on top inside the shield, and a small starburst effect inside at bottom of shield. Finally only put lines on each side of "Proudly Protecting Others" and take lines off of WFB at bottom outside the shield on #45. Thank you.

Halo , Thank you for your feedback.
I've seen 2 comments , one in public client comment and one in here .

update variations :
#62 ------ #66 #67

#45 ------ #68 #69 #72

#60 ------ #71

#50 ------ #70


Regards,
Serjunan .

Let me see number 62 with a small starburst in bottom of shield. DO NOT add separation bars inside shield. Also, let me see a version with large WFB inserted underneath shield like in number 71 with same changes stated above. Thank you.

sure ,
like this ? #73 and #74

Can you point the starburst top arrow downward so its pointing to words underneath shield, and can you highlight wording underneath shield with more of a 3D effect?

sure , please check my entry #75 #76 #77

Thank You for your feedback .

Regards,
Serjunan

On number 76, raise the starburst more underneath WFB without moving WFB (center starburst).

On number 47, reverse order of WFB and starburst and make bars a little thinner. Point starburst down like in number 76, then add shadow underneath with same lettering and shield size as number 76.

PS--The bars in 47 revised should only bracket WFB.

On number 62--add thinner bars bracketing WFB

Please also provide a rendition with Proudly Protecting Others in gold color. Thank you.

Halo ,
please check my entry for #76 ------> #81 and #87 (gold color)

I have some variation of #47 ------> #82 #83 #84 #85

and #62 -----> #85

Best Regards ,
Serjunan

sorry ,
I mean , #62 -----> #86

Reverse numbers 86 and 81 and make blue inside shield with gold WFB and starburst.

Hi ,
update for #92 and #93 .

entry #91 doesn't work very well because of low connection ..

Please try #93 without the starburst and in the same color scheme as #90. Please enlarge Proudly protecting others just a bit.

update ,
#94 #95

Can you please emboss WFB in #94 some more, and can you use size of "Proudly Protecting Others" from #94 and place it in #66? Thank you

Sure ,
here is my entry , #97 #98 #99 #100 #101

Regards,
Serjunan

Could you add a bit more depth to #99 and #100 as you did to #101? Thanks.

Halo ,
Update #102 #103 and #104 .

Can you replace teal color on outside of shield in #102 with purple?

Sure ,
please check my new entry , #108 #109 and #110


Regards,
Serjunan

Make 110 look like 103 please

update #111

Can you "flip" the colors in #103 and can you try two separate ones with gold inside and blue inside, but using a more royal blue instead of teal? (3 total) Thank you.

Also, can you remove the starburst from #93?

In #59, can you emboss/3D the lettering using same font style and enlarge "proudly protecting others" as you did in #103?

In #59, can you emboss/3D the lettering using same font style and enlarge "proudly protecting others" as you did in #103?

flip like this ? #112

Can you switch out the colors in 103 and 117 and use same blue lettering as in 117 underneath shield as well? Thanks.

update #118 #119

Can you make 117 in 3D like 118 please? Thanks. Can you emboss "WFB" a little more on 118 as well?

Halo ,
update ,

please check my entry #121 and bigger scale in #122 .
for #117 --> #120


Regards,
Serjunan .

Can you add "WFB" in #77 underneath shield in #122, and then can you also do #122 with "WFB" underneath shield AND put "WFBLC" inside shield? Leave everything else in #122 exactly the same for both versions. Thank you.

yes , sure .
please review #123 #124 #125 and #126 ,

Are you able to send me TRANSPARENT VECTOR files for the following numbers if I select you as the winner? Thanks.
115
118
122
123
124
125
126

Dear Sir ,
only one file , as usual .
I'm sorry , I may not be able to do that .


Kindly Regards ,
Serjunan

Can you do this please?

http://wfblegalconsulting.com/wp-content/uploads/2015/03/wfb-wide.png

Sure ,
update #127 .

I may upload the version of #127 #121 #122 for the final file .
as long as it has the same design .
include b/w and grayscale version .

best ,
serjunan

Please do the same for design 115 as you did for 127 and size fonts accordingly. Thanks.

#128