Total Coating Solutions LimitedLogo Design Contest

Thank you for your designs Ivan. #27 has a brown background the brief asks for white
If you have a look at the contest discussion I have asked for some other designs incorporating pipework or a steel beam. if you could supply some other designs that would be great.

Im not too kean on the droplet in its current state - sorry to be so negative but I think it better to say now than have you make other designs based around this.
Regards
Steve

Thank you for the comment, I red about the white background but wanted to supply a dark background version as well. I'll check the discussion and make revisions.

Regards,
Ivan

#30 I like the silver section at the bottom of the globe - perhaps you could elaborate on this and turn it into a steel pipe or beam and incorporate the full name and slogan rather than just the initials

Thanks again for your efforts

Steve

Thanks! Let me try some variations based on your last comment.

Ivan

Beams.

(This comment references Entry #33)

Another beam design. That's from me for today - I'm hitting the bed. Good night :)

(This comment references Entry #34)

#34 this one is great - can the globe be made into a paint 'drop' and have the beam going through it - going in one side as the silver colour but coming out of the other side 'painted' - hope that makes sense - Good night
Steve

That's exactly the idea I was working on :) It definitely makes sense as a logical extension of the concept in #34
I'll upload the revision soon.

Ivan

#40 I like the idea of this but dont like the bent beam and is it possible to make it look less 'cartoonish'
#39 #41 #42 #43 #44 these dont have the effect I was hoping for.... again they look too cartoonish

You don't like the beam because it's bent or the beam itself?
I'll work on more revisions and beam versions and upload soon.

Hi Ivan - can you make the background white please without the gradient

I've uploaded new beam revisions on a pure white background, let me know what do you think?

#53 I like the straight beam. However would it be possible to make the initials TCS out of beams and tubes with similar colours and perspective so that the letters look 3D - there are still 4 days left and $400 is a lot of money to me - I want to make sure I have exhausted all options before I make a final decision - Thank you for all your input

#53 another logo i would like to see is the beam with Total Coating Solutions running down the middle of the beam - is this possible?

It would take me some time to design those but I'm working on those and will submit as soon as I'm ready. Thanks

Good morning!

I can see that you're no longer happy with my designs, so should I suspend my work on the revisions?

It's just that the last week I worked very hard on given contests and in the end I lost to some last minute entries of designers who just submitted their typical-generic-used-in-all-other-contests designs. When you've worked with the Contest Holder for days and put a big amount of work - losing this way is very bad for the spirit.

I know it's a contest and I know you're well aware those changes you're asking for need much skill, effort and time to make. I'm willing to invest those in your logo, but If you're not sure my designs have chance of winning just let me know so I can redirect my efforts to other contests.

Thank you!

About your last comment:
(This comment references Entry #56)

i am not askng you to suspend your work - that is your decision - i still havent found something that jumps out at me and makes me think - thats just what I want!

It is very hard to describe what I want - please feel free to supply more designs that you consider would suit a painting and inspection company - I still like the idea of a logo plus text but i will leave the design entirely up to you. From what I have seen of your portfolio I like the 'social stream' logo - client rank 45th can you do me a few designs based around something similar?

Steve

Thanks for the logos -
#101 can you do two revisions
1 the beam being all silver with the silver and blue letters
2 the letters being shaded blue to silver opposite to the silver blue beam

#98 can you put the image to the left and add the letters from #100 although the red in the letters may need to be replaced with blue

Thanks in advance

I'm working on those and will submit as soon as I'm ready. Thanks for the comments.

Thanks for the recent updates - one last update - #120 - can reduce the angle of the beam slightly and have the words 'Total Coating Solutions' above and 'fabric maintenance & Inpsection services' below please?

#134 Hi Ivan - I will be going with this logo but it still needs some changes - I'm sorry to mess you about but my wife doesnt like the font where the C joins the S and I dont like the upper font or the size of the tag line at the bottom - can you do some variations on fonts and have the tag line run the full length of the logo - Im not sure what font logo ranked no10 is but we both like that one

#152 #153 #154

1) No more join between the C and S
2) Changed font - #152 : Title Case #153 : Upper case bold #154 : Title Case bold
3) Tagline size changed.

I'll submit some more font variations ASAP.

Sorry Ivan I meant the same font as rank 11

Can you also raise the Total Coating Solutions above the beam

Not a problem now at least I know which font was that :)

#155 #156 #157 - the new ones

I just saw your comment for the raising of the Total Coating Solutions. I'll submit those asap.

#159 #160 #161 #162 - variations of placing and beam position

#162 is great - can you change the fabric maintenance....etc to the same font as Total coating solutions making it the same width as the beam
Can you also lower the two lines of text slightly
and also can I see the TCS logo infill fully red and then another fully blue

Did you mean something like those: #163 #164 #165 #166 #167 or #168 ?

(Take into an account that the LT.com is converting the logos in .JPEG thus the bad transfer of the red colors via the screen)

Yep thats fine #168 is the one - last set of edits
Can I see the text being a little larger even if it goes wider than the beam - I like the double separating line
Can I then see it with the infill being purple and also a greyscale version
After these edits I will make a decision; promise :)

#169 and #170 - two variation of the text larger with the double separating line
#171 and #172 - two shades of purple
#173 - greyscale version

Not a problem, whenever you're ready :)

Ok - #170 is the winner - how do you send them to me?

Cool!

When you complete the contest I get the option to upload the final files via the site in both .EPS (lossless vector file format which can be used in any size and resolution - the source files) and .JPEG preview files.
And we both get a legal contract so the copyrights are transfered to you via the site.

I hope this makes sense.

Thanks for all your hard work - we got there in the end :o)

Steve

We wouldn't be there if it wasn't your skill to direct me in the desired direction. That's rare! :)

I'm currently preparing the final files and will upload soon, so you can approve those and finalize the process.

Best Regards,
Ivan