Spinnaker LandingLogo Design Contest

Is it possible to make the font color, especially on the word "Landing" easier to read, i.e. darker or larger or both?
Thank you.

Is it also possible to show me a couple of designs with a different color blue?
Thanks!

Updated #88, #89, #90
Thanks for the feedback!

PM

Let me know if you need some changes again
Thank you

PM

Updated #91, #92

Thanks for all your input on various designs. Is it possible to use some of these colors or variations of them in the design? They are Sherwin Williams Colors: SW7613-Aqua Sphere, SW6221-Moody Blue, SW7741-Willow Tree. Here is a link to the colors:
http://www.sherwin-williams.com/homeowners/color/find-and-explore-colors/paint-colors-by-family/?q=6221

These are the colors we are considering for exterior paint so wanted to see if we could have the logo match somewhat.

Thanks so much!

Done!
Updated #94 - #97

Thank you,
PM

I am not sure if you understood my request. I am sorry if it wasn't clear. I have attached a link to a project list that shows the exterior colors we are considering painting the outside of the building. I am hoping that you can take these colors (or some slight/darker variation) of them and put them into the logo design. That would require removing the light blue and red colors and substituting the new colors. We would also like to see the font bold so that it will show up on signage. I think we are almost there. We appreciate your efforts to help us get just the right one!

https://www.sherwin-williams.com/account/project-list/

Think we like the ones that have the word Landing spelled out across the bottom vs. just in the corner.
Hope that helps!

Sorry, just wake up from my sleep
I will make the changes ASAP
Thanks!

PM

Updated #98, #99, #100
I already try this variation color (SW7613-Aqua Sphere, SW6221-Moody Blue, SW7741-Willow Tree)
and make the font more bold

If still not correct, can you please give me more details?
for example;
- Spinnaker = black
- "NN" = green
- Landing = grey

Thanks a lot
PM

We are on opposite time zones so communicating is a little challenging. It is now day for me and you are probably sleeping. Here are some suggestions. Hope you don't mind making the changes so we can find just the right one:
#98: Darken/Bold all "Spinnaker" colors, Make "Landing" black, and make all the same size as #88
#99: Darken/Bold the font, put the "dots" under the "A", make same size as #88
#100: Darken/Bold the font, make same size as #88

We like the clarity of #88 but the colors don't fit our color scheme so that is the direction we are trying to go.
Thanks so much for working with us!

Already make all the same size as #88
Updated, #101 - #108

Thank you for making the changes. Going forward all designs should be sized like #88.

#98 Please make larger and change "Landing" to the N color
#98-2 Please make N=aqua, Spinnaker=grey green and Landing=grey green. Sized like #88

#108 Please make N=blue and dots under A = blue-

Thanks so much-we are getting very close!

Sorry for the delay
Updated, #109 - #113

Thank you!,
PM