Safe-Vac, LLCLogo Design Contest

We like the colors and look. however, do not like the open tubing look on the left part of the "V" try making the right of the "V" shorter then extend it lateraly straight over the "A" and "C" tapered like a evac tip. I will post a link where you can view a pick of the product.

http://www.henryschein.com/us-en/Shopping/ProductDetails.aspx?productid=1146458&CatalogName=DENTAL&promocode=EZ

please look at www.koolfog.com. I like the two tone blues of their logo. do Safe in the darker blue like theirs and the dash and Vac in the lighter blue. do this in your current font and also in a similar font to their logo.

thanks.

make the tip on the V a little more tapered/rounded like the link I posted of the photo.

http://www.henryschein.com/us-en/Shopping/ProductDetails.aspx?productid=1146458&CatalogName=DENTAL&promocode=EZ

Make the V the same size as entry #8 in all that are ranked.

the new entries are good but the V is too long on the right side.

do this same logo in white on the blue background. thanks.

do a new logo design similar to the Powerade logo font and design. If you turn their P logo backwards it is like an S and you can incorporate a V for vac out of the straight down portion of the logo. put a few ideas together.

thanks.

Please do a new logo design similar to the Powerade logo font and design. If you turn their P logo backwards it is like an S and you can incorporate a V for vac out of the straight down portion of the logo. Please put a few ideas together.

Thanks.

Let me know if you want any changes. Thanks

(This comment references Entry #124)

Entry #124, do several different options with entry 124. I would like to see the V going to the right and make more designed like the Powerade logo, get creative. Also go to Powerade.com and see how they have POWER larger than ADE even though it is in all caps, show me some options like that.

Thanks.

Please take the art logo from entry #133 and #134 and place it below the Safe Vac wording in entry# 102. We would like to see how both options would look.

thanks.

Please also do a version of the above comment in the following cmyk values:

C-70%
M-39%
Y-25%
K-1%

Thanks.

Here's the revisions you requested. I also tweaked the design a little on the last two submissions. Let me know if you want any more changes. Thanks

(This comment references Entry #146)

entry #146 is almost perfect. Please make the right leg on the V in Vac as defined and crisp on the tip as the right leg on the V in the logo.

Thanks

in addition to the above comment can you also do one where the SV logo fades from the darker blue to the light blue where the S ends and V begins?

That would be great to see an option like that as well. sorry. almost done. just the final tweeks.

thanks.

Great. Here's the revisions. Let me know if you still want to tweak these. Thanks

(This comment references Entry #166)

entry# 167 looks sweet! few more tweeks. the V in entry# 102 has a nice fluid rounded tip on the right tip can we round all the corners on the lettering so they are't sharp 90 or 45 degree corners? Also, if there is a way to make the right leg in the V on the logo similar in width to the V in the Vac. Not sure how that will look.

Can you also do a version where the V in the logo is rotated to be upright totally like the V in vac. this may offset it to the right a little so V isn't directly under the S but we just want to view it that way.

The fade in the logo is sweet, definite keeper.

Thanks.

Here's some variations based on your feedback. I tried some different thing with the "V". Thanks

(This comment references Entry #168)

#168 & #169, can you angulate the right leg in the logo V to match the angle of the right leg in the above V in Vac? We think this will give visual harmony versus two different angles being that one is above the other.

thanks.

#173 looks great. one more change. the start of the S on the logo, please angulate the face of the S like the right tip of the V in Vac and V in the logo so all are slanted. right now the start of the S is rounded but in a funky shape and I think it would look clean and more uniform if it was like this / but at the angle of the V's