Project MAGILogo Design Contest

#1 We like the concept of the honey badger as the float. Could you make the honey badger look fiercer? And add a flag to the mast and put it to one side (i.e. not centered). Also the wave gliders have a sub body that is subsurface (a schematic is in the pdf document), could you somehow get that incorporated?

Thank you for rank and feedback.
Please check my update for consideration.

#13 & #14 there is a typo. Magi does not have an E on the end of it..

Including the subsurface part is good, but unfortunately it makes the whole thing look like a helicopter. Could you make the subsurface part one dimensional? What I mean by this is to show the blades under the water but not include the lower line under the blades.

#18 update on MAGI text
#19 try with badger in "surfing"

I don't understands with your request about "make the subsurface part one dimensional".

Sorry, let me try to explain that better. In your logos the subsurface part is "box" like in shape, when in fact the subsurface component is more of a flat surface (so i should have said make it 2 dimensional, not three dimensional). You can see photos of what the underwater part looks like at http://liquidr.com/resdown/media/image-gallery.html

how about #48 and #53?

#48 and #53 are both good. I'd also like to see #18 redone with the underwater component more realistic as I described in my previous comment,

actually #14 is better than #18 because the underwater component is deeper below the surface, but I prefer the white border is #18

Looking back over your entries I realized that #14 with the border of #18 is basically #13, so please revise that one (but correct the typo in the name!).

Sorry, this is my first contest and I'm finding it hard keeping track of all the entries.

Could you revise #13 to make the underwater component more realistic looking, i.e. drawn as a plane not a box shape?

#74-#76 are better but the underwater component is still too large. Can you take out the bar underneath the slats, a make it smaller so that it will be able to be positioned deeper below the float part? The glider component on the surface should dominate over the subsurface component.

In #73 the surface of the water is higher up in the circle, so that there is more room in the water below the glider, which is preferable to #74-#76 which has the water surface at the midway point, and hence there is less room below the glider.

update #77 and #78 let me know what you think.

Also maybe you can give me a link for reference image of wave glider with point of view that you like that will be great.I will try to it to apply in my designs.

thank you

I like #77, but part of it needs to be removed. If you look at http://www.gnarlyhorse.com I have crossed out with a red line the part I want removed. Then if you could move the underwater component deeper into the water. Also make the flag a little smaller. Thank you.

update #79 #80, #80 adding detail on claw

Great - the underwater part is perfect, and I like the detail on the claws in #80. Could you make the flag a little smaller and move it more to the front of the glider, i.e. move it over to the right a little bit?

like this #81?

Yes the size is good, but could you move the mast over to the right, so its not in the middle of the glider.

update #82 and #83 with flag move to the right

Thank you so much for all your work! This has been a lot of fun - I have never done something like this before.
You are very creative & talented.

Hi,
When I downloaded the files, the .jpg all had a black background. The .eps is fine. Please upload .jpg files with the correct background.

Already upload final files again, also other file types sent to your private email.