#14 think the barrel logo is too stretched. like the strap line starting within the circle of the logo. Please could you try an alternative font style? and some shades of blue?
I really like the style and the detail you have used for the keg and cask images. Please could you add an image (in the same style / detail) for a steel keg – to look like the photograph that I have uploaded: Keg 50L JPG?
Please could you move the image above the words? and show the barrel image and the cask image separately (two circles above the words)? please use the barrel image from #17 and the cask image from #30
95% of my customers will use kegs like in the photo I attached: Keg 50L JPG and I think I really must include an image like this in the design. Please could you design a keg that looks like 'Keg 50L JPG' in the same style as the keg / cask that you have already created? If you can do that I think we will only need to discuss the layout and you will win the competition.
Hi - with #77 please could you: 1. Move the keg on the right side to the left side and move the cask from the right side to the left side (swap them around)? 2. Replace the cask image in #77 with the cask image in #42 3. After the changes above, please could you show some variations with blue - a darker blue if possible? 4. Please could you also include some purple in the logo - i want to see what this looks like as i am thinking about using purple / silver / grey on the website.
Thanks for the new entries. apologies, I didnt do a very good job of explaining exactly what i wanted. The cask image in #42 is half cask on the left, and half barrel on the right. please could you use the cask image (left side) and make the image the full cask design (so remove the barrel image from the right side)? I like this cask design better than the cask design in #30. I hope that makes sense?
Hi - we are nearly there now... 1. #86 please could you swap the centre image with the centre image of #77 2. Please could you also reduce the height of the keg (right side image on #86) a little bit - i mean make the image inside the circle a little bit shorter) and this image has three white rings around the body of the keg, please could you remove the middle ring so that it just has two (the upper and the lower) - hope this makes sense. 3. along with the above changes, please could you change the colour back to the same as #77
Hi - sorry, I am not doing a good enough job of explaining the changes that i need! Please could you change the centre image to be the same as #17 (the full barrel - NOT half and half).