BuciotekLogo Design Contest

#9 Thanks for your entry. I like yor design and the 3D look. Try to put the red circle in the middle of the "B" on the top left corner of the B and make it look like a world and underneath it, the "|" part could be a stack of documments. Also, please see if you can integrate a shield in the logo. Thanks

new version
Nat

(This comment references Entry #12)

Thank you, you integrated my comments nicely. You new version is better. Here are some additional tips to make version #12 better:

1. Use the four colors on (Blue, red, green, yellow)
2. Play with different fonts

Also, tryo to see if you can come up with a different design. I like what you did on entry 17 of the "Tim the Tutor" contest. https://logotournament.com/contests/tim_the_tutor/by/tahiadesign_f
you have 3 items inside that shield perhaps you can do the same with mine. Make it easier to see the world (representing web design) and stack of documents (representing print management).

Thanks,

MBucio

Wow nicely done Nat. Muy bien. I like what you did there. Thanks

Hi!, I´m glad you like the concept. I´ll try different fonts in the morning.

Thanks!

Nat

Nat, you are definitly going in the right direction. I showed your design to my team and here are some additional comments:

1. The outline of entry #12 would look better on entry #21. Just the outline so that it looks more like a shiled rather than a yellow button.
2. Try to place BUCIOTEK on top of the shield and PC WEB PRINT below the shield
3. Place SOLUTIONS below PC WEB PRINT
4. Try to place an arrow around the globe to indicate movement, see this contest to get an idea: https://logotournament.com/contests/trageglobal
5. Let's try to add an image of a "shutdown" button perhaps it could be the "C" in BUCIOTEK. Look at the green logo of the Winning Entry of this contest for an idea: https://logotournament.com/contests/power_benchmark

I can tell you have a lot of talent Nat. Thanks and keep trying, I feel we are getting somewhere =-)

MBucio

new version.
Nat

(This comment references Entry #31)

Nat I prefer entry #38 over entry #37 altough the flyers look better with the 4 different colors as in entry #21, #35 and #31. You have elements on your 7 designs that if combined in the right way could very well yield a finalist or more. The thing I am not very convinced yet is the type of font used for Buciotek. It has to be elegant and unique. You tried different fonts on entry #35 but it was hard to read. The winner will have unique font customized just for this logo. The way you played with the O on entry #31 is a good example of what I am looking for. A subtle sign in the name Buciotek that represents one or more of the service I offer. Thanks you have done very good so far.

I should´ve deleted 37 before! it was my mistake. The correct entry was the one with the cross haha

I´ll update #38 with 4 colors and other changes.

Thanks for detailed feedback!

Nat

Nat, I am not sure if you are working on your new entry but here let me tell you what I like from each of your ranked entries, they all have elements of the logo I am looking for:

Entry #31
Like: The shield, the globe, the flyers, the O in Buciotek
Do not like: The arrow around the globe (too big/thick), the font used on Buciotek, the font color of Buciotek

Entry #38
Like: The shield, the color combination of Buciotek
Do not like: The globe all in green (prefer as in entry #21), the flyers all in red (better as in entry #21)

Entry #11 (This entry could easily be top ranked)
Like: Buciotek on top of the shield, the subtle grey outline around Buciotek and the shield.
Do not like: The font used on Buciotek.

Entry #21
Like: The 3D look of the shield

Try to put the things I like about your logos trogether in one and we can go from there. Thanks a lot for your effort.

MBucio

new version

Nat

(This comment references Entry #42)

New version: name on top

(This comment references Entry #43)

New version: new proportions

(This comment references Entry #44)

Nat i like entry #44 but the arrow needs improvement, can you make it like in entry #31, leave it color white and try to make it thinner. The logo looks nice in 3D but the arrow looks flat.

HI!!
here you have a new version with a thinner arrow. Please let me know what you think and if you need last minute changes before contest gets into JUDGING mode.

Thank you very much for your time and patient during the contest!
Good Luck!!
Nat

(This comment references Entry #58)

Nat, very nice. A couple more things:

Please make the b capital buciotek should be Buciotek.
Also, the color you used for "solutions" used it for PC WEB PRINT instead and leave solutions grey.
PC | WEB | PRINT should align perfectly the lenght of Buciotek
The same applies for Solutions underneath TEK

Thanks

Sorry, my comment above references entry #58. Thanks

New version. I´ll be around if you need me :)

Thanks!,
Nat

(This comment references Entry #61)

Thanks Nat, very good job of making those changes last minute.

No problem :)
I saw the message when there were only 7 minutes left!

Good Luck! I´ll be waiting for your final decision with fingers crossed haha!

Thanks for a great contest!

Nat

Thanks Nat. Could you please make these additional changes:

1. The white arrow looks go now, that's how I wanted it, now could you rotate it so that it is at a 45 degree angle. Right now it is going west to east horizontally and I would like it to go south west to north east at the 45 degree angle.

2. Both black shadows on the outline shield seem to go beyond the edge of the shield, you might have to zoom to see what I am talking about. Just remove the excess outline.

3. Please remove the small shadow underneath the shield.

Thanks

The comment above references entry #61. Thanks

hi!,

here you have a new version. About the black side shadows it was because the shield had a white outline around, now I removed it so shadows align to the shield.

I´ll be online if you need me.
Thanks!.
Nat

(This comment references Entry #65)

Thanks for the changes, I was not aware that it looked misaligned because of the white border. Sorry, let's place the white border back, it gives it a better sense of dimension. Entry #65. Good job overall, I am impressed by your talent and are easy to work with. I hope you join a contest I'll have soon regarding a Blueberry company I have... I think they call them Arandanos in Argentina.

Border back again :)
Yes, the border was there because it adds more depth to the shield. It´s incredible, but just a thin line changes everything :)
I looooooooove Arandanos!!!! my favorite fruit and hard to find here. I´d join you contest for sure!

Nat

(This comment references Entry #66)

GREAT... one more request and I promise this will be the last request... (Entry #66) until Monday when I'll come back ready with a final decision. I want to see how the logo will look on our letterhead. For that we need to make a small move, should be very simple:

Please move the shield from the top of the name Buciotek to its left and resize to fit exactly the height of both the name Buciotek and the slogan underneath.

If I could I would send you Arandanos... I'll be harvesting some this weekend. =-) I'll create a contest in a couple of months for an Arandanos logo.

Thanks! Good night.

Horizontal layout
Good Night for you too! and good luck with your arándanos!!!

Nat

(This comment references Entry #67)