Anvil Fence CompanyLogo Design Contest

Thank you very much for participating in this contest. I am sorry that it didn't work out with your designs. I see that you are a very successful designer and have won many contests!

please look carefully....This design is even easier to embroider.

In my opinion..lots of more intricate designs and they can be embroidered just fine.
please search on google lots of complex logos that can be embroidered.

I have done a poll and found that the anvil can be difficult to see the anvil at a small size and it would be difficult to embroider.

using helvetica

using arial

I prefer the Since 1961 on 392. I'm not asking you to use another designer's concept. I just like the font and spacing.

i use Hurme Geometric Sans Font

at first glance it looks the same only the kerning distance differs a little.

What is the difference between 383 and 384?

Since and 1961 are too close together. What typeface did you use here?

Changes uploaded.#383 - #385..looks like that?

*let's

Also, let'd drop the (c) on all of them for now.

Please use Arial, tighten kerning between S and I, and drop down to line.

new update uploaded #371-#376

And slightly larger and lower.

Let's change to

Since 1961

variations of fonts #367-#370

I am inclined to go without a fence element. And now that I have gotten some more guidance, I don't want to use a wood fence. Let's focus on adding since 1961 on the bottom, below the logo. Something simple such as helvetica or Ariel italic might be what I'm looking for.

I wanted to remind you that I don't want any special treatment of the letter a. I don't want it larger and by itself, or called out in any way.

uploaded.#346-#349

I am not interested in seeing a separate A with the anvil inside. Only as part of the rest of the logo. Thank you.

Please use this part with the A and the F flush left.

Maybe a fence graphic above the word ANVIL that I could use sometimes but not always.

I like what you have done with the anvil inside the A but really think a wood fence (if any fence) should be shown--not a chain-link fence. Or maybe no fence element at all.

Could you please make a version of this logo with the letters in ANVIL flush with the letters in FENCE COMPANY and no chain link? I want to omit the chain link. Thank you.

please check all my new updates..
if you need revision/something else, just let me know.

Also, I am getting away from feeling that a chain link fence on there is a good thing. I want to have more of a residential feel if there is a fence element included.

I like this treatment of the fentanyl. Another artist showed me a really good version of that, too.

Also, I am not interested in any special treatment of the a separate from the logo, but thank you for showing me those.

The picket style I am referring to is called dog eared and is shown here

https://www.amazon.com/Latch-Telescopic-Fully-Adjustable-Brace/dp/B08B454DHF/ref=asc_df_B08B454DHF/?tag=hyprod-20&linkCode=df0&hvadid=459711701429&hvpos=&hvnetw=g&hvrand=11568946023168628688&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9029550&hvtargid=pla-967049300314&psc=1

What if you used to pickets that have three edges on the end instead of two, as you show here. And is there a way to use the negative space between the eye and the l to make a total of three pickets? Interesting to explore.

uploaded #259-#262...looks like that?
let me know if it's wrong.

Were you going to also do the three versions I requested?

Bigger diamonds still?

please check all my new updates.
always open to all your revisions/suggestions.

I guess you will see the other finalists' concepts at the next stage.

I will do your revision soon.

btw...LT rules..we as designers are not allowed to copy the concepts from other designers. You as a client are also not allowed to share other designer concepts in a blind phase.

I will try to revise it and give my best. :)

Hello!

I have some more feedback for you.

- Some ppl have said the fence pattern in 169 looks incomplete because it doesn't go all the way across, but I personally think #189 looks too busy.
- The fence pattern in #199 looks good with a large version of the logo but is too fine for smaller use, such as business cards.
- What if you made the fence pattern with larger diamonds than on #169?
- What would #169 look like as it is but with the A flush left?
- I will need a version of the logo with the A flush left and no fence pattern anyway, for embroidered items.

So, I am asking you to make three more versions (last three bullet points).

On another note, another artist sent something that looks pretty interesting. Is there a way for me to share that with you?

Sherman

These are great. Thank you for putting them together.

please check all my new updates..with some horizontal variations.

If I go with your concept, which is by far my favorite at this point, I will need a version without the "fence" for the purpose of embroidered shirts, etc. In that version, I will want the word ANVIL to be flush left and right with FENCE COMPANY (just like on the original logo). And it is possible that this version will be THE version. Still not sure about how to do the fence part yet.

if you need revision/something else, just let me know.
always open to all your revisions.

Yes, this generally is what I was looking for. Thank you. I am sure you will be one of the finalists, so I won't be asking you for anything more until that stage. Great work!

uploaded...#189-#190....looks like that?

I have shown several logos to my team and your concepts are the favorite!

Please make a version of this that has the fence links going all the way from left to right. A few people asked to see this.

Thank you.

Of course

LogoTournament will remove any entries that contain the ® mark to avoid any potential problems for all parties involved in the contest.
https://help.logotournament.com/article/109-use-of-registered-trademarks
https://help.logotournament.com/article/126-please-do-not-use-registered-trademarks

I'll replace ® with © as a placeholder.. #170-#173
I hope you understand.

I'd also like to see this one with the fence going all the way across to the right.

I made a mistake here on the (R). I had a local artist design that and had him move up the second line of text but now see that he didn't move up the (R) also. It should be even with the bottom of the other text.

Okay, this is our favorite version. I still would like to see it with the (R) mark in the proper place and size (see the file attached to the original posting. Also, I'd like to see it in all black and in gray on black. We're getting really close here!

I've checked R on the original logo(
hasn't changed one bit) #135
R up a little..#136

I like the tagline better by itself, without the lines.

I like this one a lot!

The (R) mark still is not in the right position. Please refer to the original logo file.

uploaded... #129-#134

I don't like the split color A

Please position the (R) exactly as on the original logo.

How will you show Since 1961?

a bit too busy

please check all my new updates..
let me know if something is wrong.

Please include the (R) mark and space the text lines exactly as in the original logo. Thanks

What about wooden pickets above the name and keep the chain link as it is?

I like this, too!

I like this concept a lot--particularly the treatment of the anvil inside the A. Can you play with the fence concept at all?

Also, please include the (R) as it was on the original logo, and please use PMS1805.

Thank you!

Please feel free if you need revision/something else.

Best regards,
Dalhaz

I like this a lot!