one minor issue is that you still did not understand the favicon, you included the text in there and the 16x16, 32x32 are completely unreadable and just a white line, no logo can be seen. doesn't matter we will try to reduce ourselves and maybe add an 1pixel outline to make it sharp in small sizes
"The designer will reduce the file to curves or outlines. This means that your file does not have embedded text that can be edited."
this is exactly what we need, the ai and/or eps file with just the logo separated from the text. For example we want to experiment with the eyes and mouth and touch up, much easier with just the logo in the file without text.
plus can you also send us a simple white version of the logo: "Request-able Variations of the Winning Logo
Upon Client request the Designer is required to provide the following logo variations:
White Background"
Thanks. More feedback tomorrow and approval if the designer is happy.
We can't do anything anymore once we approve the files or even communicate, so we have to solve all open problems in this phase.
Yes, i know. As i said before, when the payment has been verified, I will send you the rest of the files (separated) and the font via private messages in a zip file.
Hi again, quickly looked at the submitted files and give it to the designer here, should get feedback tomorrow.
However the logo and text are still merged. As I said above we need the logo separated (without the strict text and tagline) and if possible tested in small resolutions (16x16, 32x32) as well, you have a much better insight how it works and looks there.
Thank you for choosing me as the winner. The process is:
I will deliver the final files to you through LogoTournament. When the payment has been verified, I will send you the rest of the files and the font via private messages in a zip file. Unfortunately, I can not work with the mascots since I am working full time on making the logos. Thank you again.
I have selected you as a winner already as your logo is by far the favorite. the mascot ideas from you didn't convince us yet, we will try to make a few ourselves based on the basic logo (can send you some links later).
it would be great to get the logo and the font text as separate files (and maybe 1 version together), the logo as 256x256 and down to 64x64, 32x32 and especially 16x16 for favicon.ico. If needed the complexity of the logo should be reduced for smaller sizes. For the font css/html would be prefered, but if you can tell us all about the used font we can figure it out ourselves.
If you are still interested, we still could continue working on mascots and the websites the logo is integrated via a 1-on-1 project here.
Hello. Please clarify if you would like the same robot with different features for every different site (tutorials, documentation etc.) or something completely different for every one of them. Thank you.
the right shoulder is a bit strange with the line extending to the right.
the eyes and mouth should give some options to make some mascots
are you willing to do a few mascot variants too for different sites (tutorials, documentation, getting started, libraries, etc.), we could increase the prize for that :)
very nice and simple, can you use a big I letter instead of the small i
just tried it in 32x32, still looks good. in 16x16 we can't make it out anymore, maybe you can try as well, or simplify for small sizes.
as written before adding some character to it to use as a mascot would be great too, maybe it looks from the side and looks or points at something, etc. like this one (the original logo can stay the same and look directly forward, but giving the option to look to the side, etc. would be good): https://golang.org/doc/gopher/help.png
some examples of clearly visible logos in 16x16 (browser tab, favicon.ico) (besides the obvious ones like youtube, microsoft, apple, etc.) are:
fogbugz.com (sitting bird)
golang.org (the mascot is really good in small and big)
reddit.com (the alien is clearly visible, even in favicon)
ruby-lang.org
there are many programming languages and tools that have a the icon as an avatar or mascot at the bottom of the page, even in documentations and tutorials he is always present:
really like your suggestions, especially the robots with 1 and 2 circles around it. the font is a bit too much, the other suggestion with the normal font is fitting better.
you can just suggest the robot icon itself, the font and text will most likely be all html text
what is also important is the visibility in small sizes (like 16x16 as described in the project description)
Comment Activity
one minor issue is that you still did not understand the favicon, you included the text in there and the 16x16, 32x32 are completely unreadable and just a white line, no logo can be seen. doesn't matter we will try to reduce ourselves and maybe add an 1pixel outline to make it sharp in small sizes
"The designer will reduce the file to curves or outlines. This means that your file does not have embedded text that can be edited."
this is exactly what we need, the ai and/or eps file with just the logo separated from the text. For example we want to experiment with the eyes and mouth and touch up, much easier with just the logo in the file without text.
plus can you also send us a simple white version of the logo: "Request-able Variations of the Winning Logo
Upon Client request the Designer is required to provide the following logo variations:
White Background"
Thanks. More feedback tomorrow and approval if the designer is happy.
We can't do anything anymore once we approve the files or even communicate, so we have to solve all open problems in this phase.
However the logo and text are still merged. As I said above we need the logo separated (without the strict text and tagline) and if possible tested in small resolutions (16x16, 32x32) as well, you have a much better insight how it works and looks there.
Thanks.
I will deliver the final files to you through LogoTournament. When the payment has been verified, I will send you the rest of the files and the font via private messages in a zip file. Unfortunately, I can not work with the mascots since I am working full time on making the logos. Thank you again.
I have selected you as a winner already as your logo is by far the favorite. the mascot ideas from you didn't convince us yet, we will try to make a few ourselves based on the basic logo (can send you some links later).
it would be great to get the logo and the font text as separate files (and maybe 1 version together), the logo as 256x256 and down to 64x64, 32x32 and especially 16x16 for favicon.ico. If needed the complexity of the logo should be reduced for smaller sizes. For the font css/html would be prefered, but if you can tell us all about the used font we can figure it out ourselves.
If you are still interested, we still could continue working on mascots and the websites the logo is integrated via a 1-on-1 project here.
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
https://blog.golang.org/gopher
https://miro.medium.com/max/667/1*uo_i3gm2se2tUGNqdHn4FQ.png
We would only need a few variations atm and others can create their own later on:
- Main logo on https://strict.dev favicon extension etc
- Documentation https://strict.dev/docs/Overview maybe holding a book or pointing left
- getting started/tutorial https://strict.dev/docs/GettingStarted
- one for the blog https://strict.dev/blog/
- and maybe one for packages/libraries, but we can do this ourselves when needed
Withdrawn
Withdrawn
Withdrawn
the right shoulder is a bit strange with the line extending to the right.
the eyes and mouth should give some options to make some mascots
are you willing to do a few mascot variants too for different sites (tutorials, documentation, getting started, libraries, etc.), we could increase the prize for that :)
Withdrawn
Withdrawn
Withdrawn
Withdrawn
just tried it in 32x32, still looks good. in 16x16 we can't make it out anymore, maybe you can try as well, or simplify for small sizes.
as written before adding some character to it to use as a mascot would be great too, maybe it looks from the side and looks or points at something, etc. like this one (the original logo can stay the same and look directly forward, but giving the option to look to the side, etc. would be good): https://golang.org/doc/gopher/help.png
Withdrawn
fogbugz.com (sitting bird)
golang.org (the mascot is really good in small and big)
reddit.com (the alien is clearly visible, even in favicon)
ruby-lang.org
there are many programming languages and tools that have a the icon as an avatar or mascot at the bottom of the page, even in documentations and tutorials he is always present:
golang.org has https://golang.org/lib/godoc/images/footer-gopher.jpg and in documentation (not consistent however, but still cool): https://tour.golang.org/welcome/1
yeoman.io has https://yeoman.io/static/yeoman-character-sticker.51cef7e007.png
the idea is that the base logo and mascot exists and other people can easily create their own variant like this one: https://github.com/golang/dep/raw/master/docs/assets/DigbyShadows.png
Withdrawn
you can just suggest the robot icon itself, the font and text will most likely be all html text
what is also important is the visibility in small sizes (like 16x16 as described in the project description)