We like the height of the initial wave in your 28, can we see that one to start with... and change "limited" to black.
now to the frequency... the distance between the waves we don't want to be even. The left side (where the waves are taller) we want them to be closer together, tighter, like a voice sound wave... and then further apart on the right like you have them right now.
I'm sorry this is so complicated to communicate- but the technology releases a sudden "burst" of energy (waves that are tall and close together), then they quickly die off and become short and further apart... that's what we are trying to capture here.
One last thing, would you be able to add some gradient effects to the two sections of the droplet?
Awesome! Let's go with this one.
Can we adjust the following Caps/ lower case to
"ReStimCo"
2) change LIMITED to black and stretch it so the "L" starts under the "e" in Re, and the "D" ends under the "C' in Co?
Boss likes the logo portion of this one!
no, to the name:
Can we see the name:
1) In black
2) the "E" reduced in size
3) the line on either side of the limited removed and the word expanded to about 2/3's or so the width of the company name above
Feel free to play around with some other styles or suggestions for the name portion
Hi Jesica,
I know the changes to the wave is a bit complicated to communicated. So here is a illustration that should help. First off: the illustration is made of bars, we like your thin line and want to keep the wave-like look, but wanted to show what we would to see the height of the waves become smaller in size a bit better than i could describe in writing. So, here is a link... please keep the same thin line, and wave style you currently have... but incorporate the height that we show here in this illustration.
Can you make the waves on the left (tall ones) sharper, more frequent, and closer together... it should look like a shock that is really intense that dissipates into the gentler, softer waves you already have on the right?
The Chairman REALLY likes this one. The wave is something that is core to the technology. here is a link to a wave that is more specific to the one we would like to see https://en.wikipedia.org/wiki/Electromagnetic_pulse#/media/File:Damped_sinewave.svg
would you be able to incorporate that into the logo?
Also, remove the company tagline as well?
Thanks, and keep up the good work.
-Liz
HI,
The teem felt this logo was simply too busy; too many colors, too much going on. Perhaps simplify the overall approach? Also try something that captures shockwaves or electrical pulses (vs traditional drilling) as we are re stimulating "dead" reservoirs with this technology. we are not a drilling company... we come in and revive fields that drilling companies have abandon using our plasmasher technology.
best of luck.
-Liz
Comment Activity
Withdrawn
Withdrawn
now to the frequency... the distance between the waves we don't want to be even. The left side (where the waves are taller) we want them to be closer together, tighter, like a voice sound wave... and then further apart on the right like you have them right now.
I'm sorry this is so complicated to communicate- but the technology releases a sudden "burst" of energy (waves that are tall and close together), then they quickly die off and become short and further apart... that's what we are trying to capture here.
One last thing, would you be able to add some gradient effects to the two sections of the droplet?
Withdrawn
Withdrawn
Can we adjust the following Caps/ lower case to
"ReStimCo"
2) change LIMITED to black and stretch it so the "L" starts under the "e" in Re, and the "D" ends under the "C' in Co?
Withdrawn
Check the updates
Withdrawn
no, to the name:
Can we see the name:
1) In black
2) the "E" reduced in size
3) the line on either side of the limited removed and the word expanded to about 2/3's or so the width of the company name above
Feel free to play around with some other styles or suggestions for the name portion
Withdrawn
That may be more to his liking
Withdrawn
Withdrawn
I know the changes to the wave is a bit complicated to communicated. So here is a illustration that should help. First off: the illustration is made of bars, we like your thin line and want to keep the wave-like look, but wanted to show what we would to see the height of the waves become smaller in size a bit better than i could describe in writing. So, here is a link... please keep the same thin line, and wave style you currently have... but incorporate the height that we show here in this illustration.
https://drive.google.com/file/d/0B7vA414EwjJyMFp4RHF4QzZ6UUk/view?usp=sharing
Much appreciated.
-Liz
Withdrawn
Withdrawn
Withdrawn
would you be able to incorporate that into the logo?
Also, remove the company tagline as well?
Thanks, and keep up the good work.
-Liz
Withdrawn
The teem felt this logo was simply too busy; too many colors, too much going on. Perhaps simplify the overall approach? Also try something that captures shockwaves or electrical pulses (vs traditional drilling) as we are re stimulating "dead" reservoirs with this technology. we are not a drilling company... we come in and revive fields that drilling companies have abandon using our plasmasher technology.
best of luck.
-Liz