Portes LevasseurLogo Design Contest

I'll also be sending additional files to your email: annie@porteslevasseur.com

suepr

Thank you. I'll prepare the final files now and upload.

WOW !!!! This is the one !!!!
Thanks so much for your hard work and patience !!!!
We are very proud of your result !!!!
You will receive, i guess, an officiel winner confirmation.

the last one should have been #595. Made a mistake in numbering

Hi, sorry for the delay. Here are the changes.

#592 - as per your request no. 1
#593 - as per your request no. 2
#594 - as per your request no. 3
#594 - both icon and text reduced 5%

If ever 2) and 3) are to complicated to do
just do 1)

Ok. I'll get back to you later. I have to attend Sunday Mass.

Oups, writting mistake
They explained that i can't ask of any other changes after choosing the winner.

Hello, i'm very sorry for all of this, i did?t know that this was so complicated !!!! They explained that i can't as for any other chances after choosing you.
I try this differently, starting with #584
1) change le SS as done in #591
2) in the name reduce only the width of 5%, don't touch the height ( i suppose that the font will be a bit less thicker)
3) in the icone logo reduce the width of 5%, don't touch the height

Thanks very much, you are best choise

Hello. First of all the dimensions that we are allowed to submit is 350 x 280 pixels which is equivalent to about 9.2 x 7.4 cm. What you are asking me to do is OVER the size that we are allowed to submit. That's why i reduced the size 3-folds down to fit the canvass which is 350 x 280 pixels or 9.2 x 7.4cm

The icon would be: 1.8 x 1.4 cm
The name: 5.7 x 1.2 cm

What I submitted is based on the allowable canvass size which is 9.2cm x 7.4cm.

icon size: 1.8 x 1.4 cm
name: 5.67 x 1.2 cm

If you enlarge this 3x
icon: 5.4 x 4.2 cm
name: 17.01 x 3.6

What you are seeing now (#591) is based on my explanation above. It may look a lot smaller than the rest but this is the size you asked for. It's just 3x smaller due to canvass size restrictions. Should I be selected as winner, I will give you the size exactly as you want it to be. I hoped I explained it well. Sorry to have explained it only now.

Hello Grafixspere,
I think we are misunderstanding each other.
We need SMALLER than #584 NOT bigger. See instructions sent in #584

Good morning. The SS are perfect. But the #587 i see is bigger than the #584 instead of smaller ?
Thanks

Good morning. Hope this is it.

Good morning ! Wow, now we need to adjust the overall size.
1) logo icone: when i print it out #584 has about 5.8 cm wide and 4.3 cm height, could we have 5.4cm x 4.2cm)
2) the name: when i print it out #584 has about 17.9 cm wide and 3.7 cm height, could we have 17 cm x 3.6 cm
PS: In levasseur, do you have a way that the S S have more white space, something like what you did in the S of portes
thks

ok. I will be uploading 3 sets.

hello, wow we are getting very close !
we put #583 and the sample sent in a window back to back and there are still some differences. Can you do the same, so you will see what we see ?
1) the font in Levasseur must be a bit less bold, so the word will be a bit shorter

ok. Uploading...

https://www.dropbox.com/sh/zv4nrq4qd62h8ex/AABDVqjJCB1yPzLIua-wTfc3a?dl=0

Hello Grafixspere, We are getting very close to what my boss whats. I thought of putting a file in our dropbox to simply the processus. Can you reproduces exactly the same thing with our names ? including fonts, letter thickness, spaces between letters, position of the names vs the icone logo. thanks

done in #582

WORKING on the #581
1) just a bit thiner on the font of portes so that there is a bit more white space in the E and the S (will be more readable)
2) fond in levasseur just a bit bigger 10%

about 5% thicker than #578.

letters are a little thicker here than #579.

Can you give me more white space between the logo and the name;
I think this comment didn't get to you on Friday. Can you get the letters a bit fatter but keeping the same size ? maybe 5% fatter. I notice that in the look we are trying to find in the word PORTES, the top part of the T is longer than yours, i think you mit have to modify it by hand.

Hello. Welcome back. I've done this in entry #578. You prob didn't see it. Please let me know if you need more tweaks. Thanks.

hello Grafixsphere, i'm back at work. It you have the time to look into this ?
thanks

made the necessary adjustments.

Can you give me more white space between the logo and the name;
Can you get the letters a bit fatter but keeping the same size ? maybe 5%. I notice that in the look we are trying to find in the word PORTES, the top part of the T is longer than yours, i think you mit have to modify it by hand.

Thank you.

15% bigger font

10% bigger font

That is very find with me. thanks for the feedback

OK we are getting there. Can you now put the font a bit bigger without touching the size of the icone logo. Maybe try one at 10% bigger and one at 15%.
thanks

Thanks. I'll do this as soon as I get home.

The materiel we use to fabricat our doors is polycarbonate sheet 16mm 3 walls. Look up the picture maybe that will help for ideas. Look how it looks at the end side

I will be on the road until monday but will follow up with you once or twice per day

Hummmmm, the diamond look is so so. Our door are more square or rectacle ...

first, here is the updated version of #565 with the right font for Levasseur. The rest will come next.

Hi, Sorry, but I cannot give you any email address for you to send the picture. I will be disqualified from your contest if i do so. It is strictly prohibited while the contest is going on. You can try to attach it in the main contest page if it's still possible. Anyways, I'll just to do it based on your description and tweak until we get it right. Hope you understand. Thanks.

The V as a square bottom and the A a square top. Can i send you a picture, i did it with photoshop element ?

yes but still prefer #565.
Can you get the levasseur font as the 3rd place of the contest ?

How's this?

Sorry, I just got back.

can we put the orange and gray less thick ?

hummmm so so
prerfer #564

Ok. I'll do it now.

Hello Grafixspere, sorry for last night, our home internet stop working !
do you see the logo in 3rd place ? would like the same font for levasseur and the same white spacing between the two works.
We had a meeting this morning, colleges notice that the gray and orange L is upside down. Do you have an idea so that the orange or the gray L be in a right side position ...... you can read a L for Levasseur (EX: if you flip the orange L in the bottom left corner you will read a L . thks

We prefer no trames of color. It´s nicer but hard to reproduce on clothing and signs

Ok. Thanks, I'll work on it.

Can you also cut the top of the T
Can you also get the same type of font for levasseur ?

Thank you.

PORTES a bit bolder

Ok

Hi, sorry, i'm out right now. I'll see what i can do later when i get home.

Hello Grafixsphere,
I need your advise.
We would choose your logo icone as a winner but prefer the font letters of the 2nd place.
Do you have a solution ?

Thanks

adjusted the thickness of Levassuer a bit more and made a slight change (from dark to light) to the color of the door

adjusted space and made Levasseur a bit thicker

Sorry, just got back home. I'm on it now.

can you put the levasseur just a bit thicker.
can you leave a little bit more white space between the portes and levasseur

Love much better with the door in blue WOW. thks

Hello,Can you give me bolder font for portes ?
Can we change the orange to blue and the blue to orange

Thanks for the feedback....will submit now.

hello, Good monday morning !
Like the icone !
Can you use a font more like arial bold
Can the icone be less wide (we have a restrained space)
thks

Prefer straight letters like #419

the icone size must be about the width size of #386. Keep the name all in blue please. Only blue, silver, orange color please. new idee for the logo please

please change the icone idee. Name font is OK

very intereting work, would like to see more idees.
I like that it is simple