Pelican TowersLogo Design Contest

Please check if hat is better.

Looks great. A welders hat is taller than this, can you pull the bill of the cap a little further down the back of the pelicans neck? We are ready to pick you as the winner. Thanks

I've changed the hat. It's after midnight here so I will be available again tomorrow morning if you don't mind.

One last thing...check the dropbox link...I added welders cap....instead of a bandana....can you change pelicans hat to a welders cap like the pictures in the link I sent you? We should be good to go then. Thanks!

I've made the hull deeper and limited protruding edges if that's what you meant.

Understood...I think it looks really good...you might just look at the pictures...disregard the propeller pockets on the Amante....but that gives you a good idea of the angle of the deep vee...If you make it a little deeper and start it closer to the outer edges (not such a large flat spot at the outside) I think you will have it. I will check with the owner for color options he likes best. https://www.dropbox.com/sh/yc8afzg00obyku6/AAA4cRfdLW6q_l4FUO8Wxupwa?dl=0

Here is dropbox link

I've tried to give justice to 31 Bertram transom as best as I could. If it's not quite right and you have better photos please upload them on some server (like Imgur) and post the link here. We are not allowed to give our emails until contest is over.

Can you add the v bottom and put the phone number? You are the winner but we need to tweak it. Can I email you a picture of the transom with the v shape? It is a 31 Bertram if you want to look on line. Phone number to add is 251-895-WELD

Looks great! I will pass along to owner. Thanks!

No problem, this is a layered design so everything can be moved independently. I'm posting pelican in two sizes.

If not too much trouble you might try increasing pelican size to obscure part of the tower...putting more focus on the cool pelican

Please let me know if this is enough or you want to have text and the boat bigger.

That is a good point. Maybe split the difference in the first one and this one. Pelican towers is a little tight left to right. Can you maybe make Custom Metal Fabricators stand out a little more?

Here are legs of the tower closer to the edges of the boat but when you think of it - while looking at the boat from behind - perspective will make the tower smaller and narrower than the transom.

I can do it but either tower has to be wider and taller or it will have different proportions.

Bigger boat.

Awesome! Thanks! Tower legs should be closer to outside of boat sides

I've made two versions of the curvy font. The other one is with the metallic effect. Next I will try to make a boat transom instead of the banner - if that's what you mean.

Thank you! Do you mean to make it look more like a boat transom? Or you just want the pelican not standing on the edge?

Looks great. Can you make the banner the pelican is standing on a boat transom and use a font that is more curvy instead of block? Looks great