MN 100 ClubLogo Design Contest

is there any revision again sir?

I just noticed that you send both logos to me. Thank you.
Mike

OK got it. I'll declare the winner now.

For this revision "lines 1 and 2 around the badge, I gave the same thickness with silver color on the whole".
Thankyou sir :).

For this revision "red and blue around the badge, I give the same thickness with different writing on the slogan"

Hello sir :), welcome back and please check my new revision sir ? okay, to answer your question, after the selection of the winner later if you ask for a revision "I will give the revision sir :)".
Thankyou for kindness have given.

Hi red_army 37,
We have not officially awarded you as the winner, but we plan on doing so once you can clarify for me how declaration of the winner works. My question is once the winner has been declared, are we still able to make any small changes to the logo -or- will there no longer be any changes once the winner has been declared?

We have a final zoom call on Tuesday with our full board of directors. We are looking at either logo #121 or your other logo (129), depending on whether we want any color in the logo for it's use.

Also, hopefully my last request is that the red and blue colors around the badge be almost half as thick as #121 currently.

I will declare you the winner once I hear back to you.

Congratulations!

Hello sir :), my new revision ? Thankyou.

Best Regards
andrian

Hello sir :), my new revision ? Thankyou.

Best Regards
andrian

Hello sir :), my new revision ? Thankyou.

Best Regards
andrian

Revision 2, Thankyou sir :).

Revision 1

I see that the red around the logo is now thinner. Can you do the same with the blue? Our meeting is in a little more than an hour but if you are not able to do the modification, I will let the committee know the direction the logo is going to go.

Hello sir :), please check my all red and blue revisions around the badge with all the widths and thicknesses that I have updated, so it looks different subtlety on the red and blue, as well as the silver logo. Thank you.

OK, we love your work and your logos are our favorite. With #85 I would like to make the blue and red around the perimeter and reduce to about 1/3rd the width they currently are. We want the red and blue around the badge to be more subtle, Make sense?
We also really like your black and gray logo. We are meeting in the morning to finalize between the two.

Revision 2

Revision 1

Yes sir, the solution is to change the font a little high and smooth so that it looks good on the embroidery of the hat for the slogan
"Protecting the Protectors", I will give two options for the two slogans Protecting the Protectors / Protect The Protectors in the right font later so you can judge which one works better :). Please wait sir.

Continued...Maybe a taller/thinner font? Otherwise, we can live with Protect The Protectors too

We are pretty darn certain we are going to pick your logo as the winner. I might have miscommunicated with you but can you remove the red and blue line and MN and then insert MINNESOTA in that area similar to what you did on the colored logo? Basically, the logo would only be gray and black.

One other thought, we initially like Protecting the Protectors instead of Protect The Protectors, BUT we are concerned about the adding of additional letters that might impact the ability to embroider the logo on a hat or shirt. What are your thoughts?

Oke sir, i will do it's now.

You're doing awesome. We are going to present two of your logos to our committee. The logo with the red and blue around the perimeter is great and that logo is set to present.

This logo is also liked with the gray and black perimeter. Can you replace the red and blue along with "MN" with the full spelled out Minnesota? Also change PROTECT to PROTECTING.

Please do not withdraw and of your currently active logos since we will be looking at all of them!

Thank you, Mike

Thankyou sir :) for waiting patiently.

Best Regards
andrian

Thankyou sir :) for waiting patiently.

Best Regards
andrian

Thankyou sir :), i will revision now, please waiting.

We are really liking your logo. Can you remove the red and blue bars and then try getting the red and blue as part of the perimeter of the badge/shield? Also, with the removal of the red and blue bars, please spell our Minnesota instead of MN.

Last "Protect The Protectors looks great with the flowing ribbon. Can you change that to Protecting The Protectors?

Thanks for your efforts! Mike

Thankyou sir :).

My new revision sir :). Thankyou.

Best Regards
andrian

My new revision sir :). Thankyou.

Best Regards
andrian

My new revision sir :). Thankyou.

Best Regards
andrian

I am revision now sir :), please waiting sir.

Best Regards
andrian

Adrian,
We like your logo, and we would like to get a more modern badge/shield, since the biggest reason for changing the logo was because of the badge, which was created almost 50 years ago. To give a bit more direction, maybe a bit thinner badge.

Would it be asking to much to place MINNESOTA above 100?

Thanks and we appreciate your work!

MIke

Thankyou sir :).

Best Regards
andrian

Really nice job! I have a committee I need to run your logo by them. I will have additional feedback tomorrow