Laroche Groupe Paris PropertiesLogo Design Contest

Hi Aaron,
Here I tried to create 3 options for comparison for you to choose from. Hope you will like it.

https://drive.google.com/file/d/1_Zet_mgkmIoUqcyTSGiWivm71Xok9AnU/view?usp=sharing

Cheers

Hi Dezig. I'm beginning to think your original idea here is simpler and more elegant. What would it look like if we just removed the ball on the knocker and made it a simple ring? If there is a way to incorporate a fleur de lys somewhere, give it a try. Thank you. Aaron

Another option on the knocker ring.

https://drive.google.com/file/d/1FDclAgKOW8H0XqykhQedksdbmuazYRbL/view?usp=sharing

There are two choices of positions in the lion's head, the upper one is more to the center, and the lower one is more up so that the lower fluer de lys is more visible.

Is it true what I have made :)

https://drive.google.com/file/d/1eRMO0NWc--x2k446XHIzGXSO8W0dpz-T/view?usp=sharing

Cheers

Hi Dezig. Getting there! Try to think of it simply as a ring that the circle of the door-knocker passes through, so it should be symmetrical on the top and the bottom. Here's a way to think of it: https://www.shutterstock.com/image-photo/lion-door-knocker-paris-france-148927097

And this is without the line effect on the door knock.

https://drive.google.com/file/d/1M2zzs8Emn9s1zjibPrERXV-zivbrNwtU/view?usp=sharing

Hi Aaron,
Is it like this?
I tried to create 2 options, so you can compare them and I also added a little line effect to the door knocker.

https://drive.google.com/file/d/1j-eCI_bZpv63ONzxfXHuA8ybEppezQNU/view?usp=sharing

Hi Dezig, I miscommunicated, sorry. I was talking not about the chin of the lion but of the "chin" of the ball on the door-knocker. You can see what I'm talking about here: https://drive.google.com/file/d/1wvc7_FLsdAH-Ces0Iu3ssVAaGA5kEuWQ/view?usp=share_link

Hi, here are the changes to the door knocker, I made it a little rounded oval to make it more like the picture you sent, please check the following link:

https://drive.google.com/file/d/1C-Hf_AbOIMi6BMrYRw43-k5rgK6zGXkt/view?usp=sharing

In this second picture, I did not remove the chin because it would look strange on the lion shape, but slightly reduced the chin so that the fleur de lys is more visible.
Please check the following link:

https://drive.google.com/file/d/1GujwbPhH-adOJfPfX4E_aXaTkJIwV7ML/view?usp=sharing

I think I prefer keeping the white outline. Could we make the door knocker slightly smaller so that the bottom part is closer to where a 4th bottom fleur de lys would be? Let's take the "chin" off of the knocker bulge as well. In the photo I shared with you, that part is actually the metal piece that is attached to the door that the ring bangs against.

The following removes the white outline on each flower and fleur de lys object.

https://drive.google.com/file/d/1uFIA9w7W0uoDN82mTxyUC13a63ZkWPss/view?usp=sharing

Another option, the addition of "fleur de lys" is at the following link:

https://drive.google.com/file/d/12ZB9bfpEdRtZtafsnPuOfTDNN1BAGQW3/view?usp=sharing

Here is the revised logo based on your instructions, please check it out. I apologize once again that if the image is "fleur de lys" then I do not dare to display the entry logo in this contest, because it will definitely cause reporting by other designers who feel their ideas have been taken by me.
To see the changes, please check the following link:

https://drive.google.com/file/d/17i_em-FA7GHyHl7Tx9b2L4VmQhl5rfBX/view?usp=sharing

Good morning! Love the idea in the link. Is it possible to use a less stylized version of a fleur de lys? Something like this: https://www.istockphoto.com/fr/vectoriel/fleur-de-lys-gm163294586-23384841

Would it also be possible to, overall, make the width of the lines a bit thinner, finer and reduce the size of the "ball" part of the door knocker ? Thank you!

I'm sorry I can't feature "fleur de lys" here because one of the designers in this contest has used it, but I'll give you an idea at the following link:

https://drive.google.com/file/d/1zUxIIf_RlFRbj2GGTatSZB0MkWKmkoAB/view?usp=share_link

maybe this logo revision entry as another idea option, hope you like it.

Maybe reduce the overall size of the logo back to where it was in #129 but keep the type font the same

And let's try removing the two flowers that exist outside of the exterior ring.

amazing. I'm very happy with it. One last idea... is it possible now to incorporate the fleur de lys symbol where the 3 crescents are currently? It might be a bad idea, but I just was curious.

Already revised the logo, thanks for sending feedback.

Here is the revised logo, where the white part around the lion's head is connected with a wrought iron circle. Hope you like it.

Revision logo

And what do you think about the white space around the lion's head? It feels like the head should somehow be connected to the inner ring of the wrought iron halo.

This is great! love it. Can the ball on the door-knock ring be made to look less round and more like this? https://www.123rf.com/photo_78636482_doorknocker-with-head-of-lion-on-a-green-wooden-door-paris-france.html

The following is a revised logo based on your instructions, hope you like it. :)

Thank you for giving feedback :)

Due to the time that has expired, I was not able to upload the logo design that you have directed. my upload time has ended.

I apologize that I have to withdraw all my designs related to "the fleur de lys" because the concept has been created by one of the designers in this contest.

I love the direction! Could the circle around the lion's head be made to look something like this? https://drive.google.com/file/d/15NzqIbUdJeDmid5lUny3rrvFmGUfkq7y/view?usp=share_link

the second option, i hope you like my proposal.

Thank you for providing feedback :)

Thank you for providing feedback, hopefully you will like the following logo changes.

Hi Dezig. Is there a way to make the points on the logo look even more like the fleur de lys?