Ok this is seriously the last revision. can you please leave the Kurtz the way it is, but make the Design and Construction just a tad taller/larger. We are worried that the design and construction is too small
Ok can you send one of just the K Logo in the final documents? Just the "K" Logo standalone so that we can use it in different areas if need in the future
one last thing on this. keep the K and U spaced the way it is , but space the R and T and Z to match the distance of the K to the U. I think we will be done after that
Finally, do you add names and contact numbers? Or is that typically added by the company that makes the signs and cards? we just want to make sure that the font type is the same as yours. Thanks!
Also, in the final designs you send over we would like one of them to be the one where you incorporate the K Logo into KURTZ so it will fit on a business card. I think you've already completed this one. We just want it in the high definition final documents as a different variation
Thanks so much for contacting the admin! lets keep the spacing on KURTZ but just a tad bolder/bigger on the lettering and a tad bolder on the Design and construction.
Congratulations!! is there any way we can try a few more modifications to this? I meant to let this go into the selection phase and I didn't want to end everything just yet
Can you try one where the K logo is smaller, the KURTZ is a little spaced out, and Design and Construction still underneath it? basically we want it to be similar layout to the ranked 2 logo in this contest right now
Ok now please put the line, and "Design and Construction" in a dark Charcoal Color. The design and construction needs to be Bolder and slightly larger than this
ok thanks for making the "Design and Construction" larger on this. The border on the K logo was pulled away, I liked it when the border was closer to the K like in #282
ok on this one - the K logo needs to be more evenly square. as in each side needs to be equal like in logo #297. Here the K logo seems a bit tall. Bring it down a bit and we'll see what that looks like. Thanks!
I wrote a note in #283. I would like to see it withe the URTZ reduced to match the K in the box the sze of #283 (The 1st place one). I feel like here the K is now too big for the logo box, and is encroaching on the roof
ok I saw your update on this. One more suggestion. Can you keep the logo "K" the same size in this one but reduce the size of the "URTZ" so it matches the base of the "K" in the logo? I almost feel like the K got too big in your most recent update. Thanks!
ok looks great! I still feel like the Font in the "URTZ is still wider than the "K" in the logo. If you look at the bottom of the white "K" the base is clearly slimmer than the "R" base. these need to be the same size. Thanks!
for some reason the logo here looks too tall. I would like for this design to be used on signage so it needs to look proportional. can you work on making this look more proportional?
Hi There - could you make the letter "K" a little bit wider? to me it looks like the URTZ is a slightly larger font than the "K". Also wanted to see if there is anything more decorative you could add to the logo. Right now this is my favorite design. Thanks!
ok it's close! the only reflective shading on the "Z" should be in the upper right hand quadrant. Here the entire "Z" is lit up, which is not what I'm looking for. the goal is to have the effect bleed upward and across starting from the bottom left of the "K" logo, and finishing out on the top right area of the "Z" lettering. Also, there is quite a stark contrast and I think it is almost too light. the change should be noticeable, but more subtle than it currently is. hopefully it will look cohesive when it is done. I can picture it in my head it's just getting it out that might be difficult
Ok so I noticed on these last two you added the shadowing to just the bottom of the lettering, and then did one where the shadowing is just on the top. I would like to see what it looks like when you take the shadowing from the bottom left corner in the "K" icon, and the gradually move it up as you progress down the letters. so it would be a little higher on the U, the progress upwards until only the top right corner of the "Z" is showing the reflection. Give it a shot!
One more quick addition on this. Could we try one with the line, the "design and construction" words in Black, and instead of a white background do a light grey color. I want to imagine what this would look like on a light grey sign. thanks!!!!
Could you try to pull the URTZ in closer towards the "K"? for some reason it just seems like there is too much space between the K and the "URTZ". its so close to being just perfect I think!
Thanks! Getting close! let's try pulling down the "URTZ" so that the top of that lettering is even/in line with the top of the roof in the "K" logo. right now I think the "URTZ is a little too tall
Thanks this is really coming along! Could you try making the logo with the K and house in it the FIRST letter of Kurtz (instead of having a logo "K" and then another K. Next the grey line under the K would extend out to the right and create a deciding line. then beneath this dividing line you would have "Design and Construction".
Really like this design! I would like for you to try a few variations to this. Would like to see a line dividing the Kurtz on top and the "design and construction portion on the bottom. Also, would like to see only shades of Navy Blue, Blue, Grey, Light grey, etc. NO BLACK FONT this time. Switch around the colors the font vs. what is in the logo. Finally, on the logo portion, see if there is any way to add shading to add a little more depth. I think the concept of the K with the house in the logo is a very neat concept. Well work with this for now and see what happens
Comment Activity
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Hi, Ihave revised logo KURT,Please check. Thanks....
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn