Higher Institute for Paper & Industrial TechnologiesLogo Design Contest

Dear arip_teguh;
Thank you for # 128 and # 120
Please note the following changes that we would like see in your design # 113 but in separate entries, do not change your original entries as well.
Option # 1. Please do not use gray color in logo and in wording.
Option # 2. Just replace the moon with industrial wheel (as shown #44) shape with same size and concept.
Option # 3. Just replace the stairs (showing inside logo) with industrial wheel jaws.
Option # 4. Please show your logo in different color schemes and gradations (light & dark) as shown in # 128.
OPtion # 5. After all above changes please arrange the logo & wording setting same as shown in # 93 placement arrangement.

Please do the needful as early you can. Please feel free, if you have any further queries.

Dear CH HIPIT,

Thanks for feedback. I did it, but if there is else, with open arms I will accept another feedback from you

regard,
arip

Dear Arip,

You did it, we appreciate, but this is not the exactly we want.

If you see our Post, we ask you changes based on your design # 113 in same proportion not lest or more. The design concept should not be changed.
For Example:
Based on your design # 113, just change the outer moon shape into industrial wheel in same size (starting & ending point of shape) and don't change any other shapes and their position except color which can be dark navy blue color (solid and with gradations also)

Please don't change Star position should be same as shown in # 113.

Similarly, in other option just change inside stairs step into industrial wheel jaws with same angle and style and don't change any other things.

For "Higher Institute" please use the same gradation of color as you use in # 120 and show us some solid different dark colors also (Blue is not mandatory).
and for institute complete name use dark blue color or any other matching color (must be dark and single color)

One you replace outer moon with industrial wheel then it should look like same as # 113 with start, i mean don't put another wheel on other side and wheel jaws should be same size (not bigger or small).

Please do the above change as soon as possible and post at your earliest.

We 're running of time actually,

Regards

and please in options that you place logo parallel to HIPIT and name in this case the logo size should be as same the HIPIT size it should not cover the name.

or it can be equal (vertically) to HIPIT and name "edge to edge" with line inside.

thanks for feedbakc, i will do now

I did it,

little question can you show me what mean of industrial wheel jaws with same angle and style ?

thanks

Now it's ok , please give us sometime to work on it , and get back to you soon.
Kindly just tell us how we can reach you in a quick way, (i) through this post comment (ii) or send private message thru your profile.

Regards

please sent comment via this post coment, i am here, now 6.30 PM

Dear Arip,

i send u personal message please check and reply me at your earliest
Regards