HECOstixLogo Design Contest

I have updated the entries here : #206 and #207

For #207, i have added little space between Heco and Stix.

Hi, sure...i'll make the outline...

Can you add an outline around the "O" ? Just like the STIX

Can you flip the colors so the HECO is blue and the STIX are black? Just want to see what it would look like the other way. And can you add the little shadow underneath the X? One with and one without? I think we've narrowed it down to this one but want to be certain. Thanks in advance.

Hi :)
There is minor different of it. You can check the thickness of the human icon in X letter.
#200 is thinner than the #201

What is the difference between 200/201?

I have uploaded two entries here : #200 and #201

Please check!

Thank you for your outstanding work and patience as we determine the best look for this logo.

I'll do it now..

Cheers,

Can you changed the "sti" to all caps (smaller sized font so that it doesn't get larger than it currently is) but don't change the "X" at all please.

Can you take out the underline?

I have made the darker grey and black on the new entries..please check!

Sure, no problem at all...

Hello, I'm back.
I will try to make it now..

Cheers,

And darken the grey a bit, not really getting the pop i would like to see.

Please show me this logo, replace the grey border with black and outline the whole STIX please. Can you also put the same black trim around the ID of the shape on the O?

Can you capitalize the stix and make the print smaller to fit the logo?

I feel like something is a little off... Maybe the "stix" could be all caps but still smaller than HECO.. I think the dot (representing the head) is what's getting me. Because the stix are lower case, it kind of looks like the dot (head) is off to the right. We like the dot representing the head, but maybe stix in all caps would alleviate that.

OK, Thanks. I'll do it now...

Cheers

Can you add that outline to the whole "stix" part? Perhaps one with the underline at the bottom and one without? Thanks for all your hard work... we've almost got it narrowed down.

Can you add an outline around the X figure to see what it would look like? One with the underline and one without.

I have made two new entries..with minor different.

I will do it now..

Can you turn the center of the O so there is 1 point going down? Back to the original way it was and make the shape a tiny bit smaller so the O fully closes around it?

It doesn't need to be narrower, just a little smaller.

Can you make the legs in the O a tad more narrow and close out the letter? Maybe a couple variations of it to compare please.

I'm sorry for the late response.
Now, i'm back on my PC.
I will revise all the input now.

You still around?

Think of a symmetrical "Y"shape with different colored grips on the ends provided to catch the device.

Can you please round off the edges of the Chinese stars and inside the O. Our device kegs are all the same width all the way to end and slightly rounded. We feel the "Chinese stars" and he "Mercedes " logo in the O need to be more representative to our device.

Can you turn the shape in the middle of the O so there are 2 points on the bottom and 1 one on top. Don't change the shape, just turn please.

I will try in some entries...if i am misunderstanding your direction...just add more comments.

Thanks :)

Or do you mean the black line below the writing? And the inside shape is the black shapes between the triangle star inside the O?

Hello,
Where do you want me to put the black line? Is it in the triangles arc to the 'O'..?

Can you add a fine black line to the stix and the inside shape of the O cutaway?

Hi :)
Thanks for the rank and comments.
Sure, i will do it right now..

Cheers,

try using colors similar to this- https://www.google.com/search?q=orlando+visitors&espv=2&biw=1440&bih=826&source=lnms&tbm=isch&sa=X&ved=0ahUKEwivq6ypy6HSAhXJVyYKHQ0pBf8Q_AUICSgE#imgrc=ZmXqNCtb1vlw8M:

Can you make the outer shell of the "O" an orange color that pops? Still clearly legible but just a touch of added color...

Sure, i will do it now...
Thanks for your patience!

Can you play with some different color choices? Maybe Pantone 2198 U or similar instead of the orange. Thoughts?

Can you show a version with that shape replacing those smaller o's on that arc? Not the o just the Y shape alone similarly getting smaller like the versions you show.

Can you remove the taper from the arms?

Hello :)
Sure, no problem at all...i will revise it now..

Cheers

Let's try this instead of the reebok delta. Our shape is more an equidistant Y, bold lines with equal length lines and equal angles between all three legs. Then change out the discs in the background for the Y shape trailing like the discs.

Can you extend the inside shape of the "O" all the way to the edge of the letter? Basically creating a breaks at the edges/circle.

Hello :)
Thanks for your comment.
I will revise it now...

Cheers,

Or that reebok delta symbol.

Can you make the center of the "O" have a three star equidistant Y instead. That is the shape of the product this is for. If you have a direct email I can send a pic of the product.

Logo looks great, but can we incorporate a little grey in it somehow?

Sure, no problem at all..

Thanks!

Can I see what it looks like without the eye in the O?