Hi again, sure.
For #137, made the L/R lines less rounded at the tips for them to appear in line with the outer gray circle. #138 is the version with the black ring.
Thanks!
Hi again, #134 please. Thanks
1. 1st letter of G from Growing and last from Preparing are now aligned.
2. Equally spaced and sized as with Sharing.
3. Made the white border on the hop a bit thicker.
4. Greens are all of the same green.
Let's go with one color green for everything except the grey ring. I like the color of the lettering. I think Growing & Preparing should be at the same level on the G. Can you increase the white boarder around the hop cone just a tad? It looks much better. The Lettering on SHARING doesn't quite look centered/evenly spaced. Are they different size fonts in Growing Sharing & Preparing? If so, let's go to the same size & spacing.
Hi again,
Please review #132.
1. Re aligned/colored the 3 lines to match the gray circle
2. Moved the hop higher so it can be distinguished from the farm lines.
3. Made the greens greener except for the cab.
Hey Wendy - This is the logo we like best, but it still needs some clean-up. The three lines on both sides don't look like they match the circle perfectly. The hop cone still blends into the lines a little at the bottom. Can you try this with a slightly greener green?
Hi again,
I hope you mean like #131 where the cab's colors are a bit towards grey. Placed a white border on the hop so it can be distinguished from the farm lines. Please review.
Thanks!
OK - this is looking like the best of the green colors, and I like the cab slightly in the grey. Is there a way to pull it away from the P just a tad? Also, the hop cone still kind of looks funky where the lines meet at the bottom (just above "sharing").
It feels close. The hope cone looks like it's cut off on the bottom. We've decided we like the grey line with the inverse lettering, so please do that. Also, let's try this in a handful of green colors. We haven't selected our final color yet, but I like the greens you've used. We just need to avoid anything close to the pot-dispensary green we often see in Washington.
I like the line alignment. The lines need to be cleaned up a little. Can you tighten this up & send back both grey and green versions? Also, can you make the boarder a tad thicker?
Hi again,
I hope you mean like #121 (L/R lines are aligned with the outer circle) or #122 (L/R lines aligned with the inner circle).
Please review. Thanks
The lines are better, but maybe each line on the L & R sides can follow the same imaginary margin line? Once you do that, I'd like to see 120 with a thicker green line around the outside, and one version with a grey ring around the outside. Thank you Wendy.
This is our favorite. Can you move the truck away from the P a little more, and move it through the E a tad? Also, we'd like the side boards to be straight down the side, as if they were on the outside of the truck. The other designer put them on the truck like they are on an actual 1 ton Chevy.
Wendy, we really love your design. Can you try moving the Generous Corner lettering down, working on the hop cone area (maybe a different shape cone?), making the truck slightly bigger, and cleaning up the bed a little more? The bed on this kind of truck does not have a wheel well in the back. It has a flat bed. Thanks!
We really like the sideboards, but we're hoping you can add dually wheels. The wheel coming over the E in 89 looks good, but maybe it can come over a little further.
Looking sharp. Can you make it a dually truck? Also, I'm wondering about whether or not the front tires could come down over the letters just a little bit. So can you try it both with the same-size truck, and again with the truck bigger, but keep the cab at the same point in the logo?
Hey Wendy - You've definitely created one of our favorite logos. We've selected a specific model for the truck. It's a 1936 Chevrolet 1-ton Dually. Would you please modify this design to match? Thank you.
Comment Activity
Withdrawn
For #137, made the L/R lines less rounded at the tips for them to appear in line with the outer gray circle. #138 is the version with the black ring.
Thanks!
Withdrawn
Withdrawn
Withdrawn
Please review. Thank you!
Withdrawn
Withdrawn
#134 please. Thanks
1. 1st letter of G from Growing and last from Preparing are now aligned.
2. Equally spaced and sized as with Sharing.
3. Made the white border on the hop a bit thicker.
4. Greens are all of the same green.
Withdrawn
Withdrawn
Please review #132.
1. Re aligned/colored the 3 lines to match the gray circle
2. Moved the hop higher so it can be distinguished from the farm lines.
3. Made the greens greener except for the cab.
Withdrawn
Withdrawn
Withdrawn
Withdrawn
I hope you mean like #131 where the cab's colors are a bit towards grey. Placed a white border on the hop so it can be distinguished from the farm lines. Please review.
Thanks!
Withdrawn
Withdrawn
Withdrawn
Please check out #127 and on for new options. Hope one of them is on track.
Thanks!
Withdrawn
Withdrawn
#125 and #126 (enclosed the circle), please. Thank you
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Please review #123 #124 for new options. Hope making tighter means thickening the lines a bit and/or compressing the design like #124.
Thanks
Withdrawn
Withdrawn
Withdrawn
I hope you mean like #121 (L/R lines are aligned with the outer circle) or #122 (L/R lines aligned with the inner circle).
Please review. Thanks
Withdrawn
Withdrawn
Please review #120 for revisions. Thanks
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Thanks for the good news :)
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Please review #111 and #112 (moved the text a little bit below too).
Thanks
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
thank you for your patience.
Please review #99 #100 for new options.
Withdrawn
Withdrawn
Thanks for correcting.
#92, please.
Withdrawn
Withdrawn
I hope dually wheels mean rims like #91. Moved the truck a little further down too. Please review. Thank you.
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Please review #79 #80. I used the outer borders of #62 this time. Sorry about the previous entries.
Thank you!
Withdrawn
Withdrawn
Hope I got the model right.
Sorry for the delay. took a couple of hours redrawing.
Thank you!
Withdrawn
Withdrawn
Please check out #61 (expanded the outer circle lines further) and #62 for revisions.
Thank you!
Withdrawn
Withdrawn
I hope you mean like #57.
Thank you!
Withdrawn
Withdrawn
Would continue to improve and submit drafts. Still feel free to suggest too :)
Withdrawn
Withdrawn
Please check out revisions from #46 (clean version) and #47.
Thank you!
Withdrawn
Withdrawn
Please check #26 and onward for new options.
Thank you!
Withdrawn
Withdrawn
Would continue to improve and submit new ones as the contest progresses :)
Withdrawn
Withdrawn
Please review #20 and on. Hoping they're on the right track.
Thank you!
Withdrawn
Withdrawn
Tried to combine a hop and a tap on this one. Would work on alternate drafts and upload them the soonest.
Withdrawn