Hello...Yes this is the request we were looking for.
Thankyou once again for your excellent work.
We will consider all versions and make a decision soon.
Once again, thank you very much for your efforts !!!
Hello Shiwa95Design. Thank you very much for your designs and patience working with us. We feel very lucky to have you as our designer. You may not have understood our last request. We would like to see if we can shorten the thin blue line on each side of the word 'Truck Wheels" so the line becomes the same length as the base of the black "F" symbol. The effect is the thin blue line will look like an a part of the "F" logo.
I'm am sorry for the delay getting back to you. The new spacing of the word "Forgelite" works very well and improves the clarity. We are very happy with the top half of the logo.
We were hoping to alter the lower part of the logo. Can we revert back to the word "Truck Wheels" as per your design #172, however space the letters in "Truck Wheels" further apart which will reduce the length of the thin blue line on either side. We would like to reduce the length of this thin blue line so it becomes the same length as the black base of the "F" symbol.
This is great, definately think the scale works better !!! Thank you.
I think we are very close.
Is it possible to make some slight variations to compare. Is it possible to very slightly space the letters in Forgelite further apart for improved clarity and then try something different with the words "Truck Wheels". Could we try "Truck Wheels" straight up and down instead of angled over and space the letters out so the thin blue line is shortened to where it becomes an extension of the "F" logo. Try and shorten the thin blue so it is the width of the base of the "F" logo but maintains the same flow of the "F".
I hope this makes sense. Thank you so much for your time and patience.
Hello Shiwa95Design. Once again thank you for your assistance. I think I may be still favouring this design. Is it possible to try some variations. Can you try to make more of a gap in the letter "G" as it almost looks like an "O".
Also, could we lower "Truck Wheels" and increase the font size of Forgelite so it was the same height as the black part of the "F Logo" Then "Truck Wheels" could sit underneath.
Thank you.
Hello
This is heading in the right direction. Is it possible to very slightly space the letters of Forgelite to create a little bit more seperation between the letters. I was hoping to replicate the font in the design I have ranked number 4.
Hello Shiwa95Design.
Thank you for your efforts preparing your different submissions. This was out favourite. We very much like the colours and layout, but was wondering if we could explore some diferent fonts. We quite liked the font style used in the logo we ranked 2nd.
Regards Shaun
Comment Activity
Thankyou once again for your excellent work.
We will consider all versions and make a decision soon.
Once again, thank you very much for your efforts !!!
We were hoping to alter the lower part of the logo. Can we revert back to the word "Truck Wheels" as per your design #172, however space the letters in "Truck Wheels" further apart which will reduce the length of the thin blue line on either side. We would like to reduce the length of this thin blue line so it becomes the same length as the black base of the "F" symbol.
Thank you.
I think we are very close.
Is it possible to make some slight variations to compare. Is it possible to very slightly space the letters in Forgelite further apart for improved clarity and then try something different with the words "Truck Wheels". Could we try "Truck Wheels" straight up and down instead of angled over and space the letters out so the thin blue line is shortened to where it becomes an extension of the "F" logo. Try and shorten the thin blue so it is the width of the base of the "F" logo but maintains the same flow of the "F".
I hope this makes sense. Thank you so much for your time and patience.
Also, could we lower "Truck Wheels" and increase the font size of Forgelite so it was the same height as the black part of the "F Logo" Then "Truck Wheels" could sit underneath.
Thank you.
This is heading in the right direction. Is it possible to very slightly space the letters of Forgelite to create a little bit more seperation between the letters. I was hoping to replicate the font in the design I have ranked number 4.
Any feedback or request regarding this design?
Thank you for your efforts preparing your different submissions. This was out favourite. We very much like the colours and layout, but was wondering if we could explore some diferent fonts. We quite liked the font style used in the logo we ranked 2nd.
Regards Shaun