Hi, I am sorry for going radio silent. We have a big presentation this Thursday we are focused on. Will get back to looking at logo on Friday. Thank you!
Can you please add an open “v” to each corner and change the spacing so it’s even once you add it (so it looks like it’s “hugging” the corners) and increase width of the dashes by 20%?
I could not make the design, because in the Blind Phase I did not conceptualize the Block Triangle in the middle. And other designers have made it in the Blind Phase.
And if I make it in this Final Phase I will violate the designer rules.
I beg you to understand.
I just uploaded two images on a piece of paper. The first one puts two curved, amber stripes at the 3 tips of the triangle. The 2nd one puts a solid amber tip on the 3 ends and adds two small parallel arrows. Two arrows is the engineering symbol for LED light output.
Can you try these two variations so that we can see them as options?
Heard back from my partner, please:
1) please shrink the lighting bolts to 90% of this size
2) work on the spacing - the bottom right is the right spacing from the triangle
3) put the word HELP (no periods) inside the triangle like you did in # 366 and ENABLED underneath but make the spacing above and below the triangle bottom line and the words HELP and ENABLED the same. Thanks
thank you. can you try these 2 variatons:
1) only show the lighting bolts on the corners (not the outside yellow circle) and make the bolts in the yellow/ orange you were using before
2) remove the circles and instead add short dashes hugging all threee outer corners of the triangle (really short so they look like 3 --- on each side and make them the orange/ yellow color (so there will be a total of 6 ------ wrapped around the corners. thanks
Could you please delete the small inside triangle and put HELP (no periods) inside the triangle and ENABLED underneath the bottom of the triangle (to cover the space where the words are on this version). Thanks
Same comment as I made on #342.... can you take the lightning bolt out of the center, and replace the 3 sets of bars on the outside of the triangle with 3 lightning bolts? Thx!
Thanks. Can you take the starburst out of the center, and use it to replace the 3 sets of bars outside the triangle? So no bars.... instead, 3 starbursts. Almost there! Thx
This looks great! But our partners don't like the 3 markers. Can you make a few different versions that are the same amber color... but are either small lightning bolts, simple circles, or small starbursts? Something that indicates that they are flashing lights? Also, let's make the color of the HELP font one consistent color without the fading effect. So sorry for the change... we're almost there! Once we pick one, you will win the tournament, and then I'd like to reach out to you privately for some more work. If you're interested, we'd like to pay you to make some different variations of the logo (white backdrop, black backdrop, with the slogan, without the slogan, etc.), a business card template, and a powerpoint template. Interested?
Thank you for hour new submissions!
Could you please do this exact one with the spaces removed on either side of the dash so it shows up like H.E.L.P-Enabled (no spaces). Thanks!
Could you do one with just the symbol (large) and underneath that H.E.L.P. In bold and then under that ENABLED (all capitalized). Like it would go on a button thanks
I LOVE this. Can we try it with:
1) a plain line (no dashes)
2) shorter dashes
4) the road you had before (line dashes line)
3) the slogan 5% bigger?
Thank you!
Could you please make the vertical line a little thicker and the same gold orange tone as the bars and move the words a little farther to the rights the H looks too close to the bar. Thanks
Could you please also update this one with the new design for the symbol, black background, white font and un bold “ENABLED” (so only bold H.E.L.P. Thank you
And can you please do a second version where all three words: EMERGENCY and STROBE and SOLUTIONS are the same size - to the right of the triangle symbol and then UNDER the entire secition (triangle symbol included) you do the "road" I described above and then UNDER that you do the slogan "The H.E.L.P....
thanks!
This looks great! Could you please make H.E.L.P. and HELP the same color as the bars and could you add a solid line above and below the dashed line to make it look like a highway?
And could you please remove the white line separator and align “EMERGENCY STROBE SOLUTIONS” with the triangle and remover the slogan and instead make a separator line running from left to right under the triangle to the end of “Solutons” that looks like a road (dashed line) and underneath that put the slogan: “ The H.E.L.P. you need until HELP arrives”
by rounding the bars, I am referring to making them kind of "wrap" around the corners. you will need to very slightly round out the corners of the outside triangle very slightly to make it look like they "fit". thanks!
Comment Activity
Withdrawn
Thankyou
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Any Revisions ?
Withdrawn
Withdrawn
Withdrawn
Thankyou
Withdrawn
Withdrawn
Withdrawn
Thankyou
Withdrawn
Withdrawn
Withdrawn
And replace “you” with “drivers”. Thank you
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
I could not make the design, because in the Blind Phase I did not conceptualize the Block Triangle in the middle. And other designers have made it in the Blind Phase.
And if I make it in this Final Phase I will violate the designer rules.
I beg you to understand.
Regrads,
Vocuslogo
Withdrawn
Withdrawn
Can you try these two variations so that we can see them as options?
Thanks!
Withdrawn
Withdrawn
Okey I Will do it Sir
Withdrawn
1) please shrink the lighting bolts to 90% of this size
2) work on the spacing - the bottom right is the right spacing from the triangle
3) put the word HELP (no periods) inside the triangle like you did in # 366 and ENABLED underneath but make the spacing above and below the triangle bottom line and the words HELP and ENABLED the same. Thanks
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
1) only show the lighting bolts on the corners (not the outside yellow circle) and make the bolts in the yellow/ orange you were using before
2) remove the circles and instead add short dashes hugging all threee outer corners of the triangle (really short so they look like 3 --- on each side and make them the orange/ yellow color (so there will be a total of 6 ------ wrapped around the corners. thanks
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Okay, I'll try to make the changes you want.
Yes, of course I'm interested in it all,
happy to be able to work with you.
Withdrawn
Withdrawn
Okey
Withdrawn
okey I Will do it
Withdrawn
Could you please do this exact one with the spaces removed on either side of the dash so it shows up like H.E.L.P-Enabled (no spaces). Thanks!
Withdrawn
Could you please shrink the words by 5%, 10% and 15% to see which looks best?
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Could you please add the slogan from #278 under the help words and recenter?
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
This is my mistake in submitting designs,
It's the same design.
Sorry sir
Withdrawn
Withdrawn
Withdrawn
One more - with the line in white please
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Okey SIr
Withdrawn
Withdrawn
1) a plain line (no dashes)
2) shorter dashes
4) the road you had before (line dashes line)
3) the slogan 5% bigger?
Thank you!
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Okey Sir, I Will do it Sir
Withdrawn
thanks!
Withdrawn
Withdrawn
Withdrawn
okey I Will Do itu Sir
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Okey Sir I Will do it
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Okey Sir
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
instead of just 2
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Please check my designs #1, #2, #3,
I hope you like my designs and give me feedback Sir,
Thankyou
Best regrads,
Vocuslogo