I like the feel of these. I know why you put the "INC" in a "pill shape" , but it's too small for the logo to be used at smaller sizes. The "PRO INSTALLERS" could stand to be typeset a little looser and with a little more leading. Overall, it looks too tight. Maybe use a similar font for "PRO INSTALLERS" that's a little more condensed, so you can give it a little more kerning.
Hello Grafixsphere, will you try #15 with some other color combinations? (Maybe combine black and red, then combine black with yellow) We'll end up using the chosen logo against white usually.
On #88 - can you try to put some representation of "storage rack" into the logo somehow? If you look up images of warehouse storage rack - you will find what these are. The representation can be abstract but must still look like racking.
Nice job on #144. The only thing I would change is the "rack" looks like a fence. On rack there is a front and side. The front looks like what you have in black (keep this), the side that you have in red, if you could change it to look more like the end of a rack aisle (it would have a vertical post at the front where it meets the black, then remove the middle horizontal & middle post. Replace with a diagonal from top front to mid point on the back vertical, and a diagonal from same mid point to bottom of the front post) Thanks!
Almost perfect! If you could take #155 and make the revised part all red, and bring the back vertical line closer so that it is not proportional to the other side, it will look more like rack. Rack is wider (front) than it is deep (side).
Can you please take a look at the logo at the top left of this website http://www.wisconsinmaterialinstall.com/ - it has a portion of an upright and beam for a rack. If you were able to take something similar to this with the same font as in #144, put EDR on top of the beam, and PRO INSTALLERS on the bottom side. Then maybe a 2nd version with EDR PRO on top of the beam, and INSTALLERS on the bottom side. Would appreciate seeing this soon!! Thanks