hello here is the design, sorry if you do not get it right because when you zoom in on the image of the boat the smallest details are blurred, add the word "Lee" on the back, let me know any details, thanks
This is great - ok I have made a couple of mark ups starting from left to right
the tenticle is just a little out of the frame - just cut it off where the main image ends
the center part of the craken, where i have circled, does not look like it is coming out of the water but it is part of the body that is supposed to be underneath so maybe just delete it
the back of the boat looks better without the curved lines
could you add a little detail to the back rear vent
there is a wooden door with a window in the back of the cabin of the boat maybe just add in a little color to indicate that
Hello dear Guymurphy here is the design, kraken submerged in the water and tentacles coming out of it, I adjusted the rear of the boat and also reduced the percentage of the tentacles
Good morning dear Guymurphy, here I send you the design, I am still working on another with the octopus more submerged, let me know if it was what you had in mind
The left outrigger came out good. The right outrigger needs the thing I circled added so it matches the left.
Is it possible to have more of the craken's body under the water? also I liked the earlier version where some of the tentacles were coming up the sides of the boat.
also I'd like to see it with the black border removed
please make the name just a little bit smaller and cut off any part of the craken that is not within the design.
hi guy murphy, here are the designs, correct me if i'm wrong again with the side stabilizers, lower the color tone of the background, put white on the boat, lower the kraken a bit combined with sea waves remove the black around char- read let me know if it was what you had in mind 😊
Also I like the background where it is rounded like in your prior ranked illustration. If you could do that with the above changes that would be great. You can remove the sun from the background because when it’s rounded it looks like the sun already
hello dear guy murphy
What do you think of this design? the boat a little more similar to the image, the octopus more organic and more outstanding, sunset colors with blue, pink and yellow and lower the font to further highlight the graphic of the kraker and the boat
I like this one more than the other .. could you try to match the boat color to the real life color
The back of the boat only has three windows and the railing on the front needs to be finished. Also please add the outriggers
One last thing I just noticed the back of the boat is kind of hard to tell where it is - could you make that more defined and have it wood like in the pic
Yes this is coming together nicely… I have Circle three things first is the rear canopy if you could please remove that, next are two lines please remove those.
If you look at the photo you will see the outriggers which are the long stainless steel poles with wires please add those to the boat.
Could you please change the color of the octopus to a color that is more organe/reddish
Comment Activity
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
the bottom of the tuna tower should match the other side with the curve.
I think this is just about finished. You are going to win.
Withdrawn
Withdrawn
Withdrawn
the tenticle is just a little out of the frame - just cut it off where the main image ends
the center part of the craken, where i have circled, does not look like it is coming out of the water but it is part of the body that is supposed to be underneath so maybe just delete it
the back of the boat looks better without the curved lines
could you add a little detail to the back rear vent
there is a wooden door with a window in the back of the cabin of the boat maybe just add in a little color to indicate that
Withdrawn
let me know if it was what you had in mind,
if not continue working, do not worry
Withdrawn
Withdrawn
The line on the back Of the boat is still crooked
Can you make the octopuses arms that is coming around the side of the boat about 70% of its size now
Are you able To design the water over the octopuses body Right now it looks like it is floating on top of the water instead of in it
I think this is almost completely done. Very nice definitely my top choice
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Is it possible to have more of the craken's body under the water? also I liked the earlier version where some of the tentacles were coming up the sides of the boat.
also I'd like to see it with the black border removed
please make the name just a little bit smaller and cut off any part of the craken that is not within the design.
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Can you remove the black behind the name
Please add the outriggers to the boat they are those steel long poles on the sides
Can you lower the octopus in the water
Can the sunset background colors in the background be lighter more of a watercolor
Can the hull of the boat be the actual
Boat color. It’s an offwhite and the color in your photo is blue
Withdrawn
Withdrawn
What do you think of this design? the boat a little more similar to the image, the octopus more organic and more outstanding, sunset colors with blue, pink and yellow and lower the font to further highlight the graphic of the kraker and the boat
let me know any suggestions, I'm open
Withdrawn
Withdrawn
Withdrawn
Withdrawn
The back of the boat only has three windows and the railing on the front needs to be finished. Also please add the outriggers
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
If you look at the photo you will see the outriggers which are the long stainless steel poles with wires please add those to the boat.
Could you please change the color of the octopus to a color that is more organe/reddish
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
the name black border with gold letters
incorporate the profile of the boat, the bertram 31
Withdrawn