It looks like "it" gets smaller in the new version compared to this version (rank 1). Is it possible to move the "i" in "it" slightly to the right in this version with out changing the size or anything else? We just need the "i" slightly to the right, that's the last thing before we declare you as the winner :)
Something strange happent with the "t" in "it" in your last update, it became a bit blurry. So take this version (the rank 1) instead and only move the "i" in "it" slightly to the right.
I made a mistake in the writing above, please see what i meant to write below:
Can you move the "i" in "it" slightly more to the right. It still feels like it sticks out a fraction in front of the "G". Don't move the "t" when you do it, because we also want the space between "i" and "t" in "it" slightly smaller, thx
Can you move the "i" in "it" slightly more to the right. It still feels like it sticks out a fraction in front of the "G" and the space between "i". Don't move the "t" when you do it, because we also want the space between "i" and "t" in "it" slightly smaller, thx
Change Proto to the dark colour in this version, and move the letters in "reating" slightly to the left so the "g" doesn't stick out behind the "o" in "Proto". Also move the "i" in "it" slightly to the right, thx
For comparison can you switch the colours around in this rank 1 version.
Do one version where "Proto" + "Creating it" is dark and the bottom of the bulb + "Grp" is light blue
Also do another version where "Proto" is dark and the bottom of the bulb + "Grp" + "Creating it" is light blue.
Yes you can send us both files (upper and lower case slogan), when we decide on which colour version. I'll push for the decision today, sorry it's taken longer than normal :)
Can you push the letters in "reating" a tiny bit together so the "g" moves a little bit to the left, it feels like it sticks out slightly under the "o" in "proto".
And move the "i" in "it" a fraction to the right. Thx :)
This is the one we're going with. Can you make the copyright symbol slightly bigger so the "c" has the same size as the other letters in "reating". Make sure "Creating" still lines up with "Proto" front and end.
We're debating the font for "reating it" (the copyright symbole excluded). Can you try 1 or 2 different fonts while keeping the same size so "Creating" lines up with "Proto" front and end, and "it" lines up with "Grp" front?
In this version it feels like "Creating" is an extremly litle bit to long compared to "Proto", something like 0,25mm. If you look at the rank 2 version "Creating" has the perfect lenght there. Its a very small difference but if you zoom in a lot you're able to meassure it. Can you see if you can fix it in this design and in the design where you moved the slogan slightly down and figure slightly to the left?
Take this version but move "reating" closer to the "c", so "creating" lines up with "Proto" start and end, like the other version. Also make a version with these changes but where "creating it" is moved slightly down and the bulb figure is moved slightly to the left.
There is the same distance from the "c" to the circle all around the circle, and the edges of the opening of the "c" are parallel. Make it look like this
We've decided that we're going to choose one of your designs as our logo :) but we're considering a name change after a survey feedback. We'll give you the new name in a few days, so you can change it in your designs. Congratulations with winning the tournament :)
We have a small female breast issue. The top of the figure can look like 2 such breasts with the heads being the nipples. Can you work a bit on the 2 arms reaching upwards to avoid this resemblance?
Thx for the updates. Move this figure a bit further up so the bottom of the bulb (the screw) starts at the same height as the company name starts. Also scale the figure slightly bigger, same size as the original design. And make another design with the same updates, but with yellow and orange colour swapped around in the figure
We like your designs, and have a few things we want to try out in all of the designs.
1. Make the figure orange in one side and yellow in the other, like the one you've alrdy made.
2. Move the figure further up, so that it's at the same height as the company name.
3. Change the colour around in the company name, so that "Boy" is light blue and "Vil" is dark blue.
4. Look at the design in rank 8, use that shape of "y" in "Boy" and "l" in "Vil". You'll probably have to move the tagline slightly down to make room for the new shape of the "y"
We like your idea but think the the 2 figures look to much like fifa or uefa fair play. Can you modify the figures but keep the idea with them creating the bulb between them?
Comment Activity
Withdrawn
Withdrawn
Can you move the "i" in "it" slightly more to the right. It still feels like it sticks out a fraction in front of the "G". Don't move the "t" when you do it, because we also want the space between "i" and "t" in "it" slightly smaller, thx
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Do one version where "Proto" + "Creating it" is dark and the bottom of the bulb + "Grp" is light blue
Also do another version where "Proto" is dark and the bottom of the bulb + "Grp" + "Creating it" is light blue.
Yes you can send us both files (upper and lower case slogan), when we decide on which colour version. I'll push for the decision today, sorry it's taken longer than normal :)
Withdrawn
Withdrawn
And move the "i" in "it" a fraction to the right. Thx :)
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
There is the same distance from the "c" to the circle all around the circle, and the edges of the opening of the "c" are parallel. Make it look like this
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Question: Does the screw on the bulb have the same colour as "Vil"? If not then make it so it does have the same colour.
We also want "Making it cool" to have the same colour as "Boy", but i think it alrdy does (I'm a bit colour blind sry), thx
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
Withdrawn
1. Make the figure orange in one side and yellow in the other, like the one you've alrdy made.
2. Move the figure further up, so that it's at the same height as the company name.
3. Change the colour around in the company name, so that "Boy" is light blue and "Vil" is dark blue.
4. Look at the design in rank 8, use that shape of "y" in "Boy" and "l" in "Vil". You'll probably have to move the tagline slightly down to make room for the new shape of the "y"
Withdrawn
Withdrawn
Withdrawn