Wall Ball™Logo Design Contest

ja'far,

Here is what I will need:

Version #1 : Logo #118 & 119 (To be used on dark Background, I believe this is the same logo)
Version #2 : Logo # 103 (To be used on White Background, No Box around "Wall Ball" word mark)
Version #3 : Logo #104 (Horizontal Version, No box for white background, Box for color background).
Congratulations!!! I will be announcing you as the winner! Hoping to continue our partnership for future projects.

Hi a'far, To use on a white background, I prefer not to use the box around "Wall Ball." On a color background, I prefer to use the "Wall Ball" word mark in the box. Is this an option?

Thank you. This is awesome!!!

Yes, I will provide all the files needed including Pantone Color

Do you provide pantone colors, color numbers or locations etc.?

Sure, you will get everything you want

Would I be able to get multiple versions:
Version #1: Logo #118 & 119 (To be used on dark Background, I believe this is the same logo)
Version #2: Logo # 103 (To be used on White Background)
Version #3: Logo #104 (Horizontal Version)

This is awesome!!!

sorry there is a little mistake, I fixed it on #118 & #119

How about this ? with a design like this it will be easy to change to any background color like a #117 with blue background

This design is awesome. If we use a blue or red back ground we will lose the Word mark "Wall Ball" into the design because of the color of the "Wall" on a blue background and "Ball" on a red background. What would a solution be? Either a thin outline around Wall Ball or A red outline around the blue "Wall" and blue outline around the Red "Ball" word? Thoughts?

differ only in wordmark height so you can compare which font height is more suitable

What is the difference between design 104 and 105?

updated

updated

sure, please wait

This is great! Can you show this to me with the "Wall Ball" word mark on the right side as well as an option.

updated

updated

No. Sorry. Review this photo.
https://www.dropbox.com/sh/r30wphmmy3jrrmb/AABWSHCjHylBxwrWkr_yR9fea?dl=0

how about #100 ?

No. Sorry if I'm not explaining it well. My intention with the lines were to have them inside the bottom of the plate (with the shaded red area). Wanted them to start at the tip of the plate and have extend and ultimately disappear. The lines would be very thin and then ultimately disappear giving this area of the design motion.

you can check in #93 #94
did you means like that?

This actually makes it look slow! Like it splattered on a wall and now it is slowly oozing down the wall! The line I was asking for were to be within the home plate border. Fast lines that didn't start at the tip, entered thin (Faint color), continued up the plate thicker (More color) and than faded (Faint color to no color). Hope this helps. If you have a better way to sho this "fast" experience please do so. Please let me know your thoughts, again, on how to make the logo seem like it is embroidered. Give it texture. Thank you so much.

Same here. Fastness in the bottom of the plate. Can be lines that start after the point and then fade away. How do we create and embroidered logo on the "WB"?

Keep this design. Also Can we create an element of fast on the bottom part of the plate. Adding lines or negative space to give it a sense of movement which will take some of the thickness out as well. Also still looking to give the "WB" some texture that will make it appear as an embroidered logo. Similar to that of an MLB team logo on a cap. You are doing awesome! Thanks.

please check my new update

Also need to bring back the word mark "Wall Ball" to another design. Would like to have 1 logo with just "WB" logo and a second logo with "WB" logo, 3-D home plate, and "Wall Ball" Wordmark.
Thank you!

This is great. A few more asks. I love the other design where the "WB is outlined. 1. Can we outline the "WB in grey? 2. I need to get depth and dimension to the bottom portion of the home plate to create a 3-D effect. Can we lines and shadows to create the look of the plate being on an angle. Almost tipping the plate back with the point of the plate in the air. Less than 45 Degrees.

Like the "W" in Blue and the "B" in Red. The bricks and balls can be colored accordingly.

Really like the "WB" logo, wall ball word mark. On this version, the Wall Ball word mark is too large. Over powers the design. Can we create a better version of the plate. Modern approach on the plate. Anyway to give the "WB" texture to create a "stitched" look. Like an MLB team logo embroidered on a cap.

The "WB" Logo gets lost in the this color scheme.

Really like the "WB" logo, wall ball word mark. Can we create a better version of the plate and point coming down. Modern approach on the plate. Anyway to give the "WB" texture to create a "stitched" look. Like an MLB team logo embroidered on a cap.

Ja'far. Loving your concepts. How do we get the "WB" to stand out and make a statement??

Also, Let/s think about the "MB" as a 3-D stitch that you would see on a Major League Baseball Cap as an embossed logo.

I would like to see a few versions of the "WB" logo. Needs to be strong enough to stand alone. In addition, I'd like to see a home plate silhouette to go through the left side of the "WB' and the right side of "Wall Ball."

hi,,,
thank you for your appreciation
any feedback? if you have anything else in mind let me know.
We are ready to go!
Have a great day :)

Like the "WB" logo. Would like to focus on that without the bats. Feel the bats make this design to Youthful. Like the brick but maybe a more modern approach than just subway tiles. Prefer the font in Design #1. Do not like the font of Wall Ball.

Meant to say the "WB in design #3.

Like the font and coloring of Wall Ball. Like the incorporation of the brick within the ball. Would like to see the "W" become a "WB" as in design #2. Want to focus on a WB Logo as it will be used on Product.