Hello Nibiru, Many thanks for your work, Would it be possible to remove "The Law Office" , please? Furthermore, might you try to place "LOONIS" above "QUELEN" as it is for example for Cozen O'Connor, please? Many thanks again. Best regards, Guillaume
Hello Nibiru, Thanks for the TRIDENT logo and all your work! It its an excellent idea. Would it be possible to have more proposals with a trident, please? Furthermore, LOONIS-QUELEN is my family name, then would it be possible to have the two words in capital lettrer please? A logo with thick letters and another logo with thin letters would be appreciated. Many thanks in advance. Best regards, Guillaume
Can you please explain in a public comment on the contest page that the trident concept is first introduced by me, so it wouldn't become a free for all concept. Thanks in advance, Nor.
Thanks for understanding, I wish your contest would be the most successful one and please don't hesitate to ask if you have any suggestion regarding to improvize my entries according to your visions. Thanks, Nor.
Thanks for your support! I would like to know if at logo 70, it would be possible to: - refine the TRIDENT as logo 71. Then it would be still in diagonal - see the S of LOONIS and the N of QUELEN aligned on the same vertical line. Perhaps in workng on the space between the letters : wider spaces for LOONIS and/or narrower spaces for QUELEN In order for the words LOONIS and QUELEN to form a unvisible rectangle... not sure to be very clear. Many thanks in advance. All the best,
Many thanks for your work! Do you think it is possible to put détails on the Trident please? such as the shape of the cutting edge by a shade. And all the ideas you can have, please.
Dear Nibiru, Many thanks! It is great! Is it possible to try LOONIS QUELEN with other police (more condensed or not, more modern, ...), please? Many thanks in advance. Best regards, Guillaume
Many thanks Nibiru! Letters on logo 82 are very nice. Nevertheless, I would like to know if it is possible to keep the top of the letters of LOONIS aligned with the top of the square and letter of QUELEN on the same line of the bottom of the square. I can imagine that it is tricky because you might be obliged to make an unappropriate space between LOONIS and QUELEN. But, perhaps there are two solutions: 1. increase de size of the words; or 2. integrate smthg between LOONIS and QUELEN. Many thanks again. Best regards, Guillaume
Dear Nibiru, another request please. What do you think about trying to make the thickness 3 branches of the trident slightly thiner from the base to the barb? I am not sure to be able to express myself properly, sorry. Do not hesitate to ask if it is not clear enough Many thanks, G
I can't fulfill one of your request with regards of integrating something between LOONIS and QUELEN because someone else had already used that concept. Sorry for the inconvenience...Logo Law. Thanks, Nor.
I think it's okay and appropriate for facebook, tweeter & LinkedIn icon as well. Take your time, I'll leave my studio for few hours and will revert as soon as I am back (if any). Thanks, Nor.
Dear Nibiru, Many thanks for your new proposals. Perhaps a mix of 104 and 103? The beginning of the branches stay as 104 so curved; The second part of the branches stay as 103 so straight The angle might be as 103 What do you think? For the 105 I am still thinking...
Sorry perhaps, I didn't express myself appropriatly. At the entry #103, the two external branches might be strainght either parallel with the middle branch OR slightly turned towards the middle one (but still straight) (then the 3 branches together would form an imaginary arrowhead if we would trace three lines from each branch) , please
Many thanks Nibiru, From the #112, would it be possible to try: - a logo with a trident white without shadows; - a logo with the wave horizontaly (without ondulation); - a logo with barbs towards exterior; - a logo with the two external branches slightly opened towards exterior. Many thanks for your patience and your great job! Guillaume
Dear Nibiru, Excellent job! From the #117: YES concerning the barbs towards exterior it is OK; YES concerning the sea witout ondulation it i OK
NO concerning the Trident going out the square, sorry, I didn't express myself properly. What I meant is the two external branches might not be in parallel. I would like to see the two branches slightlty towards the outside (like a V) (the opposite example from #111).
Dear Nibiru, I thank you very much again for your work. I think that the proportions of #123 and #124 are good because trident will be visible even if the logo is small. Please, would it be possible for #123 and #124 to: - put the barbs towards exterior of the trident (as for #118 and #117); - put the two outside branches directed slightly less toward the outside (perhaps they are too opened). Many thanks in advance. Best regards, Guillaume
Dear Nibiru, Many thanks! Sorry, for my English and I chose a not enough expressing logo about barbs. About my previous message : "- put the barbs towards exterior of the trident (as for #118 and #117 );": it was not barbs and branches outside the square. It was the two barbs as for #94, turned towards exterior and not towards the middle branch. Many thanks again. If you want to make a break, we can continu tomorrow? Otherwise, I continu to work during the next hour. All the best, Guillaume
Hi Nibiru, How are you? I come back to you concerning #130. The feedbacks are the following questions: 1. Is there enough contrast because black and white is often used for printing documents 2. Is it possible to have a French "Cabinet juridique" and an English version "Law Office", written perhaps below the logo and QUELEN, please? Many thanks in advance. Best regards, Guillaume
Dear Nibiru, many thanks for your new proposals! I thinlk that #137 is excellent ! 1. About the black and white, I was meaning that I send a document in color but the recipient would print it in black and white. So, ma question was, is it sure that the contrasts on the colored logo are all right, please ? I asked to my printer if it was possible to integrate the trident in an embossing process (pressing the paper against an engraved die). He confirmed that it is possible. He asked me he asked to determine the electronic file of the part to gauffrer embossing to create a an engraved die. Would it be possible to have this file please? Many thanks. All the best best, Guillaume
Dear Nibiru, I would like to ask you few potential improvments. Please, would it be possible to : 1. have more spaces between each letter of the words LOONIS and QUELEN? 2. reduce silghtly the global size of trident? Many thanks in advance. Best regards, G 3. reduce the lenght of the two external branches?
Hi Nibiru, When I print the #142, 143, 141, 138 and 132, the result is not the one I was expecting. Contrasts appear clearly on #138 (b&w) but I prefere in blue color. Would it be possible on #142 to: 1. have the trident in white; 2. have more space between letters of the words LOONIS - QUELEN (not between the names LOONIS and QUELEN) . I thank you in advance. Best regards, Guillaume