Suspension Direct IncLogo Design Contest

Minor update the the large background bolt and the word ECLIK.

Label at 2 x 3 aspect ratio (trim)

Sticker update

1. adjusted the ECLIK Lettering and outline
2. increased ECLIK letter i bolt
3. reposition SDI (no side change)
4. adjusted WALKER log to fit with in bottom safe zone
5. Serial and Prod. Number set a 4pt

The pink fame is trim size and the lime green is safe zone.

If we adjust the safe zone of more protection the ECLIK, Prod & Serial number would be an issue for size as well as the numbers would be partially into the white space

SDI and WALKER logo only minor adjustments

This is pretty much it, few minor things:
• Less thick of an outline on the font
• Lightning bolt brought down so the top of the I was in line with the other letters
• Lightning bolt in the logo could be a bit larger
• SDI logo was a bit bigger/moved down so its jsut above the Walker Evans racing band

How's this?

1. I took the original ECLIK and modified it to better fir the label width and I've modified the letter E

2. Part number and serial can be placed upper right corner

3. adjusted the large bolt

So, one thing we really liked was the lightning bolt in the clik was lined up on the original sticker.

Few things:
• Font needs to be different. Bold is fine, but thats very plain. The other was better, and more stylized.
• It should read eclik, this is reading e-click. We do like the lightning bolt being the i.
• The big lightning bolt needs to be cut off at the bottom to not invade the Walker Evans Racing Band
• Move the SDI lower, just above the walker Evans Racing black band, make the SDI logo bigger.
• Needs a location for Part Number and Serial Number.

Thank you.

How's this?

We do like this, However, there are a few things we would like fixed.

• Get rid of the suspension direct.com Banner
• Switch the Red and the Black background, we feel its too much red
• Move the Walker Evans Racing Banner across the bottom, all the way
• SDI could move above the Walker Evans banner, where the walker Evans Banner is now, once the banner is moved
• Capital E in eclik.
• We don't quite like the font. We like what you did with the I and the lightning bolt, but between the border and the font styling, we want something different. Something a bit cleaner. closer to the eclik logo we uploaded. Bold is fine.

update showing bleed and trim lines for 2 in x 3 in the safe soze is 0.07 in all round

Yes, the background is a simulated shiny effect, which will not be part of the final design it is used for display purposes only. The gradient would bot be printed on metallic substrate.

The hexagon pattern is a 8% tint of the Pantone black that add\s a wee bit of texture to the metallic surface.

The white will be the metallic substrate showing through. Rounded corners would be nice to have.

Hello and welcome to Logo Tournament.

Question when was SDI founded?